Title: Joint Source-Channel Coding with One-Bit ADC Front End

Abstract: Motivated by the practical constraints arising in sensor networks and Internet-of-Things applications, the zero- delay transmission of a Gaussian measurement over a real single-input multiple-output (SIMO) additive white Gaussian noise (AWGN) channel is studied with a low-resolution analog-to-digital converter (ADC) front end. The optimization of the encoder and the decoder is tackled under both the mean squared error (MSE) distortion and the distortion outage probability (DOP) criteria, with an average power constraint on the channel input. Optimal encoder and decoder mappings are identified for the case of a one-bit ADC front end for both criteria. For the MSE distortion, the optimal encoder mapping is shown to be non-linear in general, and it tends to a linear encoder, in the low signal-to-noise ratio (SNR) regime, and to an antipodal digital encoder in the high SNR regime. This is in contrary to the optimality of linear encoding at all SNR values in the presence of a full precision front end. For the DOP criterion, it is shown that the optimal encoder mapping is piecewise constant, and can take only two opposite values when it is non-zero. For both the MSE distortion and the DOP criteria, necessary optimality conditions are derived for a K-level ADC front end and for multiple one-bit ADC front ends. These conditions then are used to obtain numerically optimized solutions. Extensive numerical results are provided to gain insights into the optimal encoding and decoding functions.