Title: Influence of process conditions and pore morphology on the closure rate of pores in hot rolling of steel

Abstract: Steel sheets are manufactured from slabs produced in continuous casting, which inevitably results in a porous initial microstructure. These pores are nuclei for ductile damage and need to be closed during rolling in regard of the strict performance requirements of todays advanced high strength steels. Due to the beneficial shape factor of the roll gap, recrystallization and high diffusion rates pore closure and elimination occurs primarily during hot rolling. In this paper, relevant influencing factors on pore closure are investigated based on representative volume elements (RVE). First, the load regime of typical multi-pass hot rolling schedules is calculated via macro scale FEM and then applied to micro scale RVEs. Within the RVE, shape changes of a given pore are tracked and the closure ratio is calculated. This paper elucidates the effect of different roll diameters, absolute reductions per pass, pore shape and pore orientation on the closure rate. The results show that the majority of pores can be closed during the initial hot rolling stages. However, pore closure can be accelerated through suitable process parameters. Furthermore, shape and orientation of pores should be taken into account, if a precise knowledge of the total height reduction, leading to complete pore closure, is desired.