Title: Hexavalent (Me-W/Mo)-modified (Ba,Ca)TiO$_3$-Bi(Mg,Me)O$_3$ perovskites for high-temperature dielectrics

Abstract: We report on the synthesis of complex lead-free perovskite-type (1-x)(Ba$_{0.8}$Ca$_{0.2}$)TiO$_3$-xBi(Mg$_{0.75}$W$_{0.25}$)O$_3$ (BCT-xBMW) and (1-x)(Ba$_{0.8}$Ca$_{0.2}$)TiO$_3$-xBi(Mg$_{0.75}$Mo$_{0.25}$)O$_3$ (BCT-xBMM) solid solutions via conventional solid-state reaction route. The sintering temperature was adjusted as a function of composition x to obtain dense samples (relative densities over 95%) at the same time minimizing bismuth evaporation. X-ray diffraction analysis shows formation of single-phase perovskites for $0 \le x \le 0.10$ in the BCT-xBMW series and increasing concentrations of impurity phases for $x \ge 0.15$ and for $x \ge 0.05$ in BCT-xBMM. A transition from a tetragonal to pseudo-cubic perovskite structure is observed in BCT-xBMW and BCT-xBMM at $x = 0.05$. The dielectric response has been characterized between -60 $^\circ$C and 300 $^\circ$C for BCT-xBMW, and between 30 $^\circ$C and 300 $^\circ$C for BCT-xBMM using impedance spectroscopy, showing a transition from ferroelectric to relaxor-like behavior at $x \ge 0.05$. Additional polarization and Raman spectroscopy measurements reveal the occurrence of highly disordered systems. Analysis of the Raman spectra indicates structural phase changes and lattice modifications caused by chemical substitution. For the composition 0.8Ba$_{0.8}$Ca$_{0.2}$TiO$_3$-0.2Bi(Mg$_{0.75}$W$_{0.25}$)O$_3$ a temperature-stable permittivity of about 600 ($\pm 15$% between 60 $^\circ$C and 300 $^\circ$C) and small losses of $\tan\delta < 0.02$ for $T \le 230$ $^\circ$C at 1 kHz are observed, making it a suitable dielectric material for high temperature capacitors.