Title: Relative Grain Boundary Energies from Triple Junction Geometry: Limitations to Assuming the Herring Condition in Nanocrystalline Thin Films

Abstract: Grain boundary character distributions (GBCD) are routinely measured from bulk microcrystalline samples by electron backscatter diffraction (EBSD) and serial sectioning can be used to reconstruct relative grain boundary energy distributions (GBED) based on the 3D geometry of triple lines, assuming that the Herring condition of force balance is satisfied. These GBEDs correlate to those predicted from molecular dynamics (MD); furthermore, the GBCD and GBED are found to be inversely correlated. For nanocrystalline thin films, orientation mapping via precession enhanced electron diffraction (PED) has proven effective in measuring the GBCD, but the GBED has not been extracted. Here, the established relative energy extraction technique is adapted to PED data from four sputter deposited samples: a 40 nm-thick tungsten film and a 100 nm aluminum film as-deposited, after 30 and after 150 minutes annealing at 400{\deg}C. These films have columnar grain structures, so serial sectioning is not required to determine boundary inclination. Excepting the most energetically anisotropic and highest population boundaries, i.e. aluminum {\Sigma}3 boundaries, the relative GBED extracted from these data do not correlate with energies calculated using MD nor do they inversely correlate with the experimentally determined GBCD for either the tungsten or aluminum films. Failure to reproduce predicted energetic trends implies that the conventional Herring equation cannot be applied to determine relative GBEDs and thus geometries at triple junctions in these films are not well described by this condition; additional geometric factors must contribute to determining triple junction geometry and boundary network structure in spatially constrained, polycrystalline materials.