We gratefully acknowledge support from
the Simons Foundation and member institutions.
Full-text links:

Download:

Current browse context:

physics.app-ph

Change to browse by:

References & Citations

Bookmark

(what is this?)
CiteULike logo BibSonomy logo Mendeley logo del.icio.us logo Digg logo Reddit logo ScienceWISE logo

Physics > Applied Physics

Title: Performance of chemically modified reduced graphene oxide (CMrGO) in electrodynamic dust shield (EDS) applications

Authors: Micah J. Schaible (1 and 2), Kristoffer G. Sjolund (3), Emily A. Ryan (4), Meisha L. Shofner (4), John R. Reynolds (1 and 4), Julie S. Linsey (2 and 3), Thomas M. Orlando (1, 2, and 5) ((1) School of Chemistry and Biochemistry, Georgia Institute of Technology (2) Center for Space Technology and Research, Georgia Institute of Technology (3) George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology (4) School of Materials Science and Engineering, Georgia Institute of Technology (5) School of Physics, Georgia Institute of Technology)
Abstract: Electrodynamic Dust Shield (EDS) technology is a dust mitigation strategy that is commonly studied for applications such as photovoltaics or thermal radiators where soiling of the surfaces can reduce performance. The goal of the current work was to test the performance of a patterned nanocomposite EDS system produced through spray-coating and melt infiltration of chemically modified reduced graphene oxide (CMrGO) traces with thermoplastic high-density polyethylene (HDPE). The EDS performance was tested for a dusting of lunar regolith simulant under high vacuum conditions (~10-6 Torr) using both 2-phase and 3-phase configurations. Uncapped (bare) devices showed efficient dust removal at moderate voltages (1000 V) for both 2-phase and 3-phase designs, but the performance of the devices degraded after several sequential tests due to erosion of the traces caused by electric discharges. Further tests carried out while illuminating the dust surface with a UV excimer lamp showed that the EDS voltage needed to reach the maximum cleanliness was reduced by almost 50% for the 2-phase devices (500 V minimum for rough and 1000 V for smooth), while the 3-phase devices were unaffected by the application of UV. Capping the CMrGO traces with low-density polyethylene (LDPE) eliminated breakdown of the materials and device degradation, but larger voltages (3000 V) coupled with UV illumination were required to remove the grains from the capped devices.
Comments: 22 pages, 7 figures
Subjects: Applied Physics (physics.app-ph); Materials Science (cond-mat.mtrl-sci)
Cite as: arXiv:2212.01891 [physics.app-ph]
  (or arXiv:2212.01891v1 [physics.app-ph] for this version)

Submission history

From: Julie Linsey [view email]
[v1] Sun, 4 Dec 2022 18:39:29 GMT (1104kb)

Link back to: arXiv, form interface, contact.