Title: An improved continuous compositional-spread technique based on pulsed-laser deposition and applicable to large substrate areas

Abstract: A new method for continuous compositional-spread (CCS) thin-film fabrication based on pulsed-laser deposition (PLD) is introduced. This approach is based on a translation of the substrate heater and the synchronized firing of the excimer laser, with the deposition occurring through a slit-shaped aperture. Alloying is achieved during film growth (possible at elevated temperature) by the repeated sequential deposition of sub-monolayer amounts. Our approach overcomes serious shortcomings in previous in-situ implementations of CCS based on sputtering or PLD, in particular the variations of thickness across the compositional spread and the differing deposition energetics as function of position. While moving-shutter techniques are appropriate for PLD-approaches yielding complete spreads on small substrates (i.e. small as compared to distances over which the deposition parameters in PLD vary, typically about 1 cm), our method can be used to fabricate samples that are large enough for individual compositions to be analyzed by conventional techniques, including temperature-dependent measurements of resistivity and dielectric and magnetic and properties (i.e. SQUID magnetometry). Initial results are shown for spreads of (Sr,Ca)RuO$_3$.