We gratefully acknowledge support from
the Simons Foundation and member institutions.

Soft Condensed Matter

New submissions

[ total of 10 entries: 1-10 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Fri, 21 Feb 20

[1]  arXiv:2002.08590 [pdf, other]
Title: Drop freezing: fine detection of contaminants by measuring the tip angle
Subjects: Soft Condensed Matter (cond-mat.soft); Materials Science (cond-mat.mtrl-sci)

In this Letter, we show that the shape of a freezing drop of water can be sensitive to the presence of impurities. We measure the tip angle of water drops frozen on a cold plate. The fine changes in tip angle are robustly captured by our image analysis method, which shows a deviation from that of pure water in solutions with salt (NaCl), polymer (PEG) and surfactant (TTAB) starting at concentrations of $10^{-6}$, $10^{-4}$ and $10^{-6}$ M respectively. The method could be adapted into a portable water purity tester, but the work also highlights the complexity of water freezing as it is influenced by trace concentrations of impurities.

[2]  arXiv:2002.08598 [pdf, ps, other]
Title: Microscopic insights into the failure of elastic double networks
Subjects: Soft Condensed Matter (cond-mat.soft); Materials Science (cond-mat.mtrl-sci)

The toughness of a polymer material can increase significantly if two networks are combined into one material. This toughening effect is a consequence of a transition from a brittle to a ductile failure response. Although this transition and the accompanying toughening effect have been demonstrated in hydrogels first, the concept has been proven effective in elastomers and in macroscopic composites as well. This suggests that the transition is not caused by a specific molecular architecture, but rather by a general physical principle related to the mechanical interplay between two interpenetrating networks. Here we employ theory and computer simulations, inspired by this general principle, to investigate how disorder controls the brittle-to-ductile transition both at the macroscopic and the microscopic level. A random spring network model featuring two different spring types, enables us to study the joined effect of initial disorder and network-induced stress heterogeneity on this transition. We reveal that a mechanical force balance gives a good description of the brittle-to-ductile transition. In addition, the inclusion of disorder in the spring model predicts four different failure regimes along the brittle-to-ductile response in agreement with experimental findings. Finally, we show that the network structure can result in stress concentration, diffuse damage and loss of percolation depending on the failure regime. This work thus provides a framework for the design and optimization of double network materials and underlines the importance of network structure in the toughness of polymer materials.

[3]  arXiv:2002.08766 [pdf, other]
Title: Stretching the limits of dynamic and quasi-static flow testing on limestone powders
Comments: 27 pages, 9 figures, 1 table, LaTeX; 2nd reviewed version with minor changes (Powder Technology)
Subjects: Soft Condensed Matter (cond-mat.soft)

Powders are a special class of granular matter due to the important role of cohesive forces. The flow behavior of powders depends on the flow states and stress and is therefore difficult to measure/quantify with only one experiment. In this study, the most commonly used characterization tests that cover a wide range of states are compared: (static, free surface) angle of repose, the (quasi-static, confined) ring shear steady state angle of internal friction, and the (dynamic, free surface) rotating drum flow angle are considered for free flowing, moderately and strongly cohesive limestone powders. The free flowing powder gives good agreement among all different situations (devices), while the moderately and strongly cohesive powders behave more interestingly. Starting from the flow angle in the rotating drum and going slower, one can extrapolate to the limit of zero rotation rate, but then observes that the angle of repose measured from the heap is considerably larger, possibly due to its special history. When we stretch the ring shear test to its lowest confining stress limit, the steady state angle of internal friction of the cohesive powder coincides with the flow angle (at free surface) in the zero rotation rate limit.

Cross-lists for Fri, 21 Feb 20

[4]  arXiv:2002.08515 (cross-list from physics.flu-dyn) [pdf, other]
Title: Evaporation Induced Rayleigh-Taylor Instabilities in Polymer Solutions
Comments: Accepted for publication in Philosophical Transaction A
Subjects: Fluid Dynamics (physics.flu-dyn); Soft Condensed Matter (cond-mat.soft)

Understanding the mechanics of detrimental convective instabilities in drying polymer solutions is crucial in many applications such as the production of film coatings. It is well known that solvent evaporation in polymer solutions can lead to Rayleigh-B\'enard or Marangoni-type instabilities. Here we reveal another mechanism, namely that evaporation can cause the interface to display Rayleigh-Taylor instabilities due to the build-up of a dense layer at the air-liquid interface. We study experimentally the onset time ($t_p$) of the instability as a function of the macroscopic properties of aqueous polymer solutions, which we tune by varying the polymer concentration ($c_0$), molecular weight and polymer type. In dilute solutions, $t_p$ shows two limiting behaviors depending on the polymer diffusivity. For high diffusivity polymers (low molecular weight), the pluming time scales as $c_0^{-2/3}$. This result agrees with previous studies on gravitational instabilities in miscible systems where diffusion stabilizes the system. On the other hand, in low diffusivity polymers the pluming time scales as $c_0^{-1}$. The stabilizing effect of an effective interfacial tension, similar to those in immiscible systems, explains this strong concentration dependence. Above a critical concentration, $\hat{c}$, viscosity delays the growth of the instability, allowing time for diffusion to act as the dominant stabilizing mechanism. This results in $t_p$ scaling as $(\nu/c_0)^{2/3}$.

Replacements for Fri, 21 Feb 20

[5]  arXiv:1905.00657 (replaced) [pdf, other]
Title: Small-scale demixing in confluent biological tissues
Comments: 32 pages, 17 figures
Subjects: Soft Condensed Matter (cond-mat.soft); Biological Physics (physics.bio-ph)
[6]  arXiv:1909.01835 (replaced) [pdf, other]
Title: Using Mw dependence of surface dynamics of glassy polymers to probe the length scale of free surface mobility
Authors: Yu Chai, Thomas Salez (LOMA), James Forrest
Journal-ref: Macromolecules, American Chemical Society, 2020, 53 (3), pp.1084
Subjects: Soft Condensed Matter (cond-mat.soft); Disordered Systems and Neural Networks (cond-mat.dis-nn)
[7]  arXiv:1911.11127 (replaced) [pdf, ps, other]
Title: Three-body problem for Langevin dynamics with different temperatures
Subjects: Soft Condensed Matter (cond-mat.soft); Statistical Mechanics (cond-mat.stat-mech)
[8]  arXiv:2001.02563 (replaced) [pdf, other]
Title: Non-equilibrium phase separation with reactions: A canonical model and its behaviour
Comments: 45 pages, 14 figures
Subjects: Soft Condensed Matter (cond-mat.soft); Statistical Mechanics (cond-mat.stat-mech)
[9]  arXiv:1908.04993 (replaced) [pdf, other]
Title: The non-homogeneous flow of a thixotropic fluid around a sphere
Comments: 28 pages, 16 Figures, accepted manuscript at Applied Mathematical Modeling
Subjects: Fluid Dynamics (physics.flu-dyn); Soft Condensed Matter (cond-mat.soft)
[10]  arXiv:1909.03660 (replaced) [pdf, other]
Title: The effective shear and dilatational viscosity of a particle-laden interface in the dilute limit
Comments: 28 pages, 4 figures
Subjects: Fluid Dynamics (physics.flu-dyn); Soft Condensed Matter (cond-mat.soft)
[ total of 10 entries: 1-10 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)

Links to: arXiv, form interface, find, cond-mat, recent, 2002, contact, help  (Access key information)