We gratefully acknowledge support from
the Simons Foundation and member institutions.

Superconductivity

New submissions

[ total of 7 entries: 1-7 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Wed, 15 Jul 20

[1]  arXiv:2007.06640 [pdf, other]
Title: Optical properties of superconducting pressurized LaH$_{10}$
Comments: 9 pages, 9 figures
Journal-ref: Physical Review B 102, 024501 (2020)
Subjects: Superconductivity (cond-mat.supr-con)

Recently superconductivity has been discovered at around 200~K in a hydrogen sulfide system and around 260~K in a lanthanum hydride system, both under pressures of about 200 GPa. These record-breaking transition temperatures bring within reach the long-term goal of obtaining room temperature superconductivity. We have used first-principle calculations based on density functional theory (DFT) along with Migdal-Eliashberg theory to investigate the electron-phonon mechanism for superconductivity in the $Fm\bar{3}m$ phase proposed for the LaH$_{10}$ superconductor. We show that the very high transition temperature $T_c$ results from a highly optimized electron-phonon interaction that favors coupling to high frequency hydrogen phonons. Various superconducting properties are calculated, such as the energy gap, the isotope effect, the specific heat jump at $T_c$, the thermodynamic critical field and the temperature-dependent penetration depth. However, our main emphasis is on the finite frequency optical properties, measurement of which may allow for an independent determination of $T_c$ and also a confirmation of the mechanism for superconductivity.

[2]  arXiv:2007.06696 [pdf]
Title: Unconventional isotope effect on transition temperature in BiS2-based superconductor Bi4O4S3
Comments: 10 pages, 4 figures
Subjects: Superconductivity (cond-mat.supr-con)

We report the sulfur isotope effect on transition temperature in a BiS2-based superconductor Bi4O4S3. Polycrystalline samples of Bi4O4S3 were prepared using 32S and 34S isotope chemicals. From magnetization analyses, the isotope component (aS) was estimated as -0.1 < aS < 0.1. Although the Tc estimated from electrical resistivity was scattered as compared to those estimated from the magnetization, we observed no clear correlation between Tc and the isotope mass. The present results suggest that unconventional paring states are essential in Bi4O4S3.

[3]  arXiv:2007.07110 [pdf]
Title: In-plane p-wave coherence length in iron-based superconductors
Authors: E.F. Talantsev
Comments: 21 pages, 11 figures
Subjects: Superconductivity (cond-mat.supr-con); Strongly Correlated Electrons (cond-mat.str-el)

High-temperature superconductivity in iron-based layered compounds discovered by Hosono group (Kamihara et al 2006 J. Am. Chem. Soc. 128 10012) is fascinating physical phenomenon which still has many unanswered questions. One of these questions is the superconducting gap symmetry in iron-based superconductors (IBS), for which the most agreed concept is multiple-band $s$-wave symmetry. Recently, an alternative concept of single-band $p$-wave symmetry has been proposed. To disprove/reaffirm the latter concept, in this paper we analyse temperature dependent in-plane coherence length in FeSe, FeSe1-xTex, Ba(Fe1-x(Co,Ni)x)2As2 and Ca10(Pt4As8)((Fe,Pt)2As2)5 in order to extract the gap-to-critical-temperature ratio, 2$\Delta$(0)/$k$$_B$$T$$_c$, and the specific-heat-jump ratio, $\Delta$C/C,in these compounds. In the result, we report that deduced ratios are in a good agreement with the concept of single-band $p$-wave superconductivity in these materials.

Cross-lists for Wed, 15 Jul 20

[4]  arXiv:2007.06951 (cross-list from cond-mat.mtrl-sci) [pdf, other]
Title: Theoretical investigation of twin boundaries in WO$_3$: Structure, properties and implications for superconductivity
Comments: 19 pages, 15 figures
Subjects: Materials Science (cond-mat.mtrl-sci); Superconductivity (cond-mat.supr-con)

We present a theoretical study of the structure and functionality of ferroelastic domain walls in tungsten trioxide, WO$_3$. WO$_3$ has a rich structural phase diagram, with the stability and properties of the various structural phases strongly affected both by temperature and by electron doping. The existence of superconductivity is of particular interest, with the underlying mechanism as of now not well understood. In addition, reports of enhanced superconductivity at structural domain walls are particularly intriguing. Focusing specifically on the orthorhombic $\beta$ phase, we calculate the structure and properties of the domain walls both with and without electron doping. We use two theoretical approaches: Landau-Ginzburg theory, with free energies constructed from symmetry considerations and parameters extracted from our first-principles density functional calculations, and direct calculation using large-scale, GPU-enabled density functional theory. We find that the structure of the $\beta$-phase domain walls resembles that of the bulk tetragonal {\alpha}1 phase, and that the electronic charge tends to accumulate at the walls. Motivated by this finding, we perform ab initio computations of electron-phonon coupling in the bulk $\alpha_1$ structure and extract the superconducting critical temperatures , $T_c$, within Bardeen-Cooper-Schrieffer theory. Our results provide insight into the experimentally observed unusual trend of decreasing Tc with increasing electronic charge carrier concentration.

[5]  arXiv:2007.07103 (cross-list from physics.app-ph) [pdf]
Title: Properties of Nb3Sn films fabricated by magnetron sputtering from a single target
Subjects: Applied Physics (physics.app-ph); Materials Science (cond-mat.mtrl-sci); Superconductivity (cond-mat.supr-con)

Superconducting Nb3Sn films were fabricated on sapphire and fine grain Nb substrates by magnetron sputtering from a single stoichiometric Nb3Sn target. The structural, morphological and superconducting properties of the films annealed for 24 h at temperatures of 800-1000 {\deg}C were investigated. The effect of the annealing time at 1000 {\deg}C was examined for 1, 12, and 24 h. The film properties were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The DC superconducting properties of the films were characterized by a four-point probe measurement down to cryogenic temperatures. The RF surface resistance of films was measured over a temperature range of 6-23 K using a 7.4 GHz sapphire-loaded Nb cavity. As-deposited Nb3Sn films on sapphire had a superconducting critical temperature of 17.21 K, which improved to 17.83 K when the film was annealed at 800 {\deg}C for 24 h. For the films annealed at 1000 {\deg}C, the surface Sn content was reduced to ~11.3 % for an annealing time of 12 h and to ~4.1 % for an annealing time of 24 h. The Raman spectra of the films confirmed the microstructural evolution after annealing. The RF superconducting critical temperature of the as-deposited Nb3Sn films on Nb was 16.02 K, which increased to 17.44 K when the film was annealed at 800 {\deg}C for 24 h.

Replacements for Wed, 15 Jul 20

[6]  arXiv:2003.14354 (replaced) [pdf, other]
Title: Microscopic free energy functional of superconductive amplitude and phase: Superfluid density in disordered superconductors
Comments: 4 figures; published version; change of the title
Journal-ref: Phys. Rev. B 102, 024514 (2020)
Subjects: Superconductivity (cond-mat.supr-con)
[7]  arXiv:2004.01383 (replaced) [pdf]
Title: Freestanding n-Doped Graphene via Intercalation of Calcium and Magnesium into the Buffer Layer - SiC(0001) Interface
Comments: 58 pages, 10 figures, 4 tables. Revised text and figures
Subjects: Materials Science (cond-mat.mtrl-sci); Superconductivity (cond-mat.supr-con)
[ total of 7 entries: 1-7 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)

Links to: arXiv, form interface, find, cond-mat, recent, 2007, contact, help  (Access key information)