We gratefully acknowledge support from
the Simons Foundation and member institutions.

Instrumentation and Detectors

New submissions

[ total of 9 entries: 1-9 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Thu, 29 Oct 20

[1]  arXiv:2010.14884 [pdf, other]
Title: New software based readout driver for the ATLAS experiment
Authors: Serguei Kolos (for ATLAS TDAQ Collaboration)
Comments: 7 pages, 6 figure
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

In order to maintain sensitivity to new physics in the coming years of LHC operations, the ATLAS experiment has been working on upgrading a portion of the front-end electronics and replacing some parts of the detector with new devices that can operate under the much harsher background conditions of the future LHC. The legacy front-end of the ATLAS detector sent data to the DAQ system via so called Read Out Drivers (ROD) - custom made VMEbus boards devoted to data processing, configuration and control. The data were then received by the Read Out System (ROS), which was responsible for buffering them during High-Level Trigger (HLT) processing. From Run 3 onward, all new trigger and detector systems will be read out using new components, replacing the combination of the ROD and the ROS. This new path will feature an application called the Software Read Out Driver (SW ROD), which will run on a commodity server receiving front-end data via the Front-End Link eXchange (FELIX) system. The SW ROD will perform event fragment building and buffering as well as serving the data on request to the HLT. The SW ROD application has been designed as a highly customizable high-performance framework providing support for detector specific event building and data processing algorithms. The implementation that will be used for the Run 3 is capable of building event fragments at a rate of 100 kHz from an input stream consisting of up to 120 MHz of individual data packets. This document will cover the design and the implementation of the SW ROD application and will present the results of performance measurements performed on the server models selected to host SW ROD applications in Run 3.

[2]  arXiv:2010.14886 [pdf, other]
Title: Extending the dynamic range of SiPMs by understanding their non-linear behavior
Comments: 39 pages, 16 figures, 3 tables
Subjects: Instrumentation and Detectors (physics.ins-det)

This publication focuses on the study of silicon photomultipliers (SiPMs) in view of a reconstruction of the incident photon flux in the regime of highly non-linear response. SiPMs are semiconductor based light detectors compiled of avalanche photodiodes operated in Geiger mode. They are both mechanically and optically very robust and have a high gain and photon detection efficiency. These features make them ideal photonsensors in a wide range of applications and they are nowadays replacing conventional photomultiplier tubes in many experiments. The cellular structure of SiPMs where each cell can only detect one photon at a time results in a non-linear dynamic range limiting the possible applications.
We studied a commonly used SiPM model based on an equivalent electronic circuit that allows the simulation of the SiPM response in many situations. Dedicated measurements with two consecutive light pulses prove its applicability. By adapting the model to the measurements, intrinsic parameters of the SiPM such as quenching resistance or diode capacitance can be determined. With the obtained intrinsic parameters, the model correctly describes the recharge behavior of the SiPM cells.
Based on the model, an algorithm was developed to correct the non-linearity of the dynamic range of SiPMs. As the model contains full information on the recharge of the SiPM cells, the effects leading to the non-linearity can be corrected for. The algorithm exploits the time information in the measured voltage signal and reconstructs the number of incident photons. It has shown an excellent performance and allows to increase the dynamic range with only 10% deviation from linearity by at least two orders of magnitude.

[3]  arXiv:2010.14980 [pdf, other]
Title: Performance of the ATLAS Hadronic Tile Calorimeter Demonstrator system for the Phase-II upgrade facing the High-Luminosity LHC era
Authors: Eduardo Valdes Santurio (on behalf of the Tile Calorimeter System)
Comments: IEEE RT 2020 this https URL
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

The High Luminosity Large Hadron Collider (HL-LHC) will have a peak luminosity of $5\times10^{34} $cm$^{-2} $\,s$^{-1}$, five times higher than the design luminosity of the LHC. The hadronic ATLAS Tile Calorimeter TileCal) is a sampling calorimeter with steel as absorber and plastic scintillators as active medium. The light produced in the scintillating tiles is guided to photomultiplier tubes (PMTs), where analogue signals are produced to be shaped and conditioned before being digitized every 25\,ns. TileCal Phase-II Upgrade for the HL-LHC will allow the system can cope with the increased radiation levels and out of time pileup. The upgraded system will digitize and send all the calorimeter sampled signals to the off-detector systems, where the events will be reconstructed and shipped to the first level of trigger, all at 40\,MHz rate. Consequently, development of more complex trigger algorithms will be possible with the more precise calorimeter signals provided to the trigger system. The new hardware comprises state of the art electronics with a redundant design and radiation hard electronics to avoid single points of failure, in addition to multi-Gbps optical links for the high volume of data transmission and Field Programmable Gate Arrays (FPGAs) to drive the logic functions of the off- and on-detector electronics. A hybrid demonstrator prototype module containing the new calorimeter module electronics, but still compatible with the present system was assembled and inserted in ATLAS during June 2019, so that the Phase-II system can be tested in real ATLAS conditions.

[4]  arXiv:2010.15061 [pdf]
Title: Systematic uncertainties from mechanics and MDI in luminosity measurement at CEPC
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

The very forward region is one of the most challenging regions to instrument at a future $e^+e^-$ collider. At CEPC, machine-detector interface include, among others, a calorimeter dedicated for precision measurement of the integrated luminosity at a permille level or better. Here we review a feasibility of such precision, from the point of view of luminometer mechanical precision and positioning, beam-related requirements and physics background.A method of the effective center-of-mass determination due to the beam-spread, initially proposed for FCC, is also discussed for the CEPC beams.

[5]  arXiv:2010.15115 [pdf, other]
Title: PCI-express based high-speed readout for the BelleII DAQ Upgrade
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

Belle II is a new generation B-factory experiment, dedicated to explore the new physics beyond the Standard Model of elementary particles at the flavor sector. Belle II has started data-taking since April, 2018, with a synchronous data acquisition (DAQ) system based on a pipelined trigger flow control. The Belle II DAQ system is designed to handle 30 kHz trigger rate with about 1% dead time under the raw event size more than 1 MB. It has been proved that the DAQ system is reliable and the overall data-taking efficiency has reached to 84.2% during the run period of Jan. 2020 - Jun. 2020. It is a big challenge to maintain the DAQ stability in the term of 10 years operation with current readout system, meanwhile, the readout system also becoming a bottleneck for providing higher speed data transmission. A solution of PCI-express based readout module with data throughput as high as 100 Gb/s, was adopted for the upgrade of Belle II DAQ system. We focus on in particular the design of firmware and software based on this new generation of readout board called PCIe40 with an Altera Arria 10 field-programmable gate array (FPGA) chip. 48 GBT (GigaBit Transceiver) serial links, PCI-express hard IP based DMA architecture, interface of Timing and Trigger Distribution (TTD) system, as well as the slow control system are designed for integrating with current Belle II DAQ system. This paper describes the performance accomplished during the data readout and slow control tests done with a pocket Belle II DAQ, as well as another demonstration test performed by using on-site Front-End Electronics (FEE), specifically involve Belle II TOP and KLM sub-detectors.

Replacements for Thu, 29 Oct 20

[6]  arXiv:1901.07401 (replaced) [pdf, other]
Title: A new experimental approach to probe QCD axion dark matter in the mass range above 40$μ$eV
Journal-ref: Eur. Phys. J. C 79 (2019) no.3, 186
Subjects: Instrumentation and Detectors (physics.ins-det); Cosmology and Nongalactic Astrophysics (astro-ph.CO); High Energy Astrophysical Phenomena (astro-ph.HE); Instrumentation and Methods for Astrophysics (astro-ph.IM); High Energy Physics - Experiment (hep-ex)
[7]  arXiv:2003.10894 (replaced) [pdf, other]
[8]  arXiv:2004.11499 (replaced) [pdf, other]
Title: Absolute measurement of the Fano factor using a Skipper-CCD
Comments: six pages, five figures, three tables, one equation
Subjects: Instrumentation and Detectors (physics.ins-det)
[9]  arXiv:2004.11378 (replaced) [pdf, other]
Title: SENSEI: Direct-Detection Results on sub-GeV Dark Matter from a New Skipper-CCD
Comments: 5 pages, 4 figures, 1 table + Supplemental Materials (5 pages, 8 figures) + References. v2: matches version published in PRL
Journal-ref: Phys. Rev. Lett. 125, 171802 (2020)
Subjects: Cosmology and Nongalactic Astrophysics (astro-ph.CO); High Energy Physics - Experiment (hep-ex); High Energy Physics - Phenomenology (hep-ph); Instrumentation and Detectors (physics.ins-det)
[ total of 9 entries: 1-9 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)

Links to: arXiv, form interface, find, physics, recent, 2010, contact, help  (Access key information)