We gratefully acknowledge support from
the Simons Foundation
and member institutions


New submissions

[ total of 67 entries: 1-67 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Thu, 19 Oct 17

[1]  arXiv:1710.06429 [pdf, other]
Title: Increased interference fringe visibility from the post fabrication heat treatment of a perfect crystal silicon neutron interferometer
Subjects: Instrumentation and Detectors (physics.ins-det)

Construction of silicon neutron interferometers requires a perfect crystal silicon ingot (5 cm to 30 cm long) be machined such that Bragg diffracting "blades" protrude from a common base. Leaving the interferometer blades connected to the same base preserves Bragg plane alignment, but if the interferometer contains crystallographic misalignments of greater than about 10 nrad between the blades, interference fringe visibility begins to suffer. Additionally, the parallelism, thickness, and distance between the blades must be machined to micron tolerances. Traditionally, interferometers do not exhibit usable interference fringe visibility until 30 $\mu$m to 60 $\mu$m of machining surface damage is chemically etched away. However, if too much material is removed, the uneven etch rates across the interferometer cause the shape of the crystal blades to be outside of the required tolerances. As a result, the ultimate interference fringe visibility varies widely among neutron interferometers that are created under similar conditions. We find that annealing a previously etched interferometer at $800^\circ \mathrm{C}$ dramatically increased interference fringe visibility from 23 % to 90 %. The Bragg plane misalignments were also measured before and after annealing using neutron rocking curve interference peaks, showing that Bragg plane alignment was improved across the interferometer after annealing. This suggests that current interferometers with low fringe visibility may be salvageable and that annealing may become an important step in the fabrication process of future neutron interferometers, leading to less need for chemical etching and larger, more exotic neutron interferometers.

[2]  arXiv:1710.06464 [pdf]
Title: New Variable Compliance Method for Estimating In-Situ Stress and Leak-Off from DFIT Data
Subjects: Geophysics (physics.geo-ph)

It is shown that using Carter leak-off is an oversimplification that leads to significant errors in the interpretation of DFIT data. Most importantly, this article reveals that previous methods of estimating minimum in-situ stress often lead to significant over or underestimates. Based on our modeling and simulation results, we propose a much more accurate and reliable method to estimate the minimum in-situ stress and fracture pressure dependent leak-off rate.

[3]  arXiv:1710.06475 [pdf, other]
Title: Photoionisation of Ca$^{+}$ ions in the valence-energy region 20$\sim$eV~--~56$\sim$eV : experiment and theory
Comments: 19 pages, 14 figures, 3 tables
Journal-ref: J. Phys. B: At. Mol. Opt. Phys. 50 (2017) 205001
Subjects: Atomic Physics (physics.atom-ph)

Relative cross sections for the valence shell photoionisation (PI) of $\rm ^2S$ ground level and $\rm ^2D$ metastable Ca$^{+}$ ions were measured with high energy resolution by using the ion-photon merged-beams technique at the Advanced Light Source. Overview measurements were performed with a full width at half maximum bandpass of $\Delta E =17$~meV, covering the energy range 20~eV -- 56~eV. Details of the PI spectrum were investigated at energy resolutions reaching the level of $\Delta E=3.3$~meV. The photon energy scale was calibrated with an uncertainty of $\pm5$~meV. By comparison with previous absolute measurements %by Kjeldsen et al in the energy range 28~eV -- 30.5~eV and by Lyon et al in the energy range 28~eV -- 43~eV the present experimental high-resolution data were normalised to an absolute cross-section scale and the fraction of metastable Ca$^{+}$ ions that were present in the parent ion beam was determined to be 18$\pm$4\%. Large-scale R-matrix calculations using the Dirac Coulomb approximation and employing 594 levels in the close-coupling expansion were performed for the Ca$^{+}(3s^23p^64s~^2\textrm{S}_{1/2})$ and Ca$^{+}(3s^2 3p^6 3d~^2\textrm{D}_{3/2,5/2})$ levels. The experimental data are compared with the results of these calculations and previous theoretical and experimental studies.

[4]  arXiv:1710.06480 [pdf, other]
Title: Model-based Design Evaluation of a Compact, High-Efficiency Neutron Scatter Camera
Subjects: Instrumentation and Detectors (physics.ins-det)

This paper presents the model-based design and evaluation of an instrument that estimates incident neutron direction using the kinematics of neutron scattering by hydrogen-1 nuclei in an organic scintillator. The instrument design uses a single, nearly contiguous volume of organic scintillator that is internally subdivided only as necessary to create optically isolated pillars. Scintillation light emitted in a given pillar is confined to that pillar by a combination of total internal reflection and a specular reflector applied to the four sides of the pillar transverse to its long axis. The scintillation light is collected at each end of the pillar using a photodetector. In this optically segmented design, the (x, y) position of scintillation light emission (where the x and y coordinates are transverse to the long axis of the pillars) is estimated as the pillar's (x, y) position in the scintillator "block", and the z-position (the position along the pillar's long axis) is estimated from the amplitude and relative timing of the signals produced by the photodetectors at each end of the pillar. For proton recoils greater than 1 MeV, we show that the (x, y, z)-position of neutron-proton scattering can be estimated with < 1 cm root-mean-squared [RMS] error and the proton recoil energy can be estimated with < 50 keV RMS error by fitting the photodetectors' response time history to models of optical photon transport within the scintillator pillars. Finally, we evaluate several alternative designs of this proposed single-volume scatter camera made of pillars of plastic scintillator (SVSC-PiPS), studying the effect of pillar dimensions, scintillator material, and photodetector response vs. time. Specifically, we conclude that an SVSC-PiPS constructed using EJ-204 and an MCP-PM will produce the most precise estimates of incident neutron direction and energy.

[5]  arXiv:1710.06483 [pdf, other]
Title: Colossal Photon Bunching in Phonon Mediated Nanodiamond Cathodoluminescence
Comments: 6 pages, 3 figures
Subjects: Optics (physics.optics)

Photon bunching with $g^{(2)}(0) > 45$ was observed in the cathodoluminescence of neutral nitrogen vacancy (NV$^{0}$) centers in nanodiamonds excited by a converged electron beam in an aberration-corrected scanning transmission electron microscope. Spectrally resolved Hanbury Brown-Twiss interferometry is leveraged to demonstrate that the bunching emerges from the phonon sideband, while no observable bunching is detected at the zero-phonon line. This is consistent with fast phonon-mediated recombination dynamics, substantiated by agreement between a Bayesian regression and a Monte-Carlo model of super-thermal nitrogen vacancy luminescence.

[6]  arXiv:1710.06508 [pdf, ps, other]
Title: Mode coupling and multiquantum vibrational excitations in Feshbach-resonant positron annihilation in molecules
Comments: 16 pages, 10 figures, submitted to Phys. Rev. A
Subjects: Atomic Physics (physics.atom-ph)

The dominant mechanism of low-energy positron annihilation in polyatomic molecules is through positron capture in vibrational Feshbach resonances (VFR). In this paper we investigate theoretically the effect of anharmonic terms in the vibrational Hamiltonian on the positron annihilation rates. Such interactions enable positron capture in VFRs associated with multiquantum vibrational excitations, leading to enhanced annihilation. Mode coupling can also lead to faster depopulation of VFRs, thereby reducing their contribution to the annihlation rates. To analyze this complex picture, we use coupled-cluster methods to calculate the anharmonic vibrational spectra and dipole transition amplitudes for chloroform, chloroform-$d_1$, 1,1-dichloroethylene, and methanol, and use these data to compute positron resonant annihilation rates for these molecules. Theoretical predictions are compared with the annihilation rates measured as a function of incident positron energy. The results demonstrate the importance of mode coupling in both enhancement and suppression of the VFR. There is also experimental evidence for the direct excitation of multimode VFR. Their contribution is analyzed using a statistical approach, with an outlook towards more accurate treatment of this phenomenon.

[7]  arXiv:1710.06522 [pdf]
Title: Infrared observation of OC-C2H2, OC-(C2H2)2 and their isotopologues
Comments: 35 pages and 5 figures
Subjects: Atomic and Molecular Clusters (physics.atm-clus)

The fundamental band for the OC-C2H2 dimer and two combination bands involving the intermolecular bending modes nu9 and nu8 in the carbon monoxide CO stretch region are re-examined. Spectra are obtained using a pulsed supersonic slit jet expansion probed with a mode-hop free tunable infrared quantum cascade laser. Analogous bands for OC-C2D2 and the fundamental for OC-DCCH as an impurity are also observed and analysed. A much weaker band in the same spectral region is assigned to a new mixed trimer, CO-(C2H2)2. The trimer band is composed uniquely of a-type transitions, establishing that the CO monomer is nearly aligned with the a-inertial axis. The observed rotational constants agree well with ab initio calculations and a small inertial defect value indicates that the trimer is planar. The structure is a compromise between the T-shaped structure of free acetylene dimer and the linear geometry of free OC-C2H2. A similar band for the fully deuterated isotopologue CO-(C2D2)2 confirms our assignment.

[8]  arXiv:1710.06539 [pdf, other]
Title: Computing parametrized solutions for plasmonic nanogap structures
Comments: 27 pages, 11 figures, 4 tables, 2 appendices
Subjects: Optics (physics.optics)

The interaction of electromagnetic waves with metallic nanostructures generates resonant oscillations of the conduction-band electrons at the metal surface. These resonances can lead to large enhancements of the incident field and to the confinement of light to small regions, typically several orders of magnitude smaller than the incident wavelength. The accurate prediction of these resonances entails several challenges. Small geometric variations in the plasmonic structure may lead to large variations in the electromagnetic field responses. Furthermore, the material parameters that characterize the optical behavior of metals at the nanoscale need to be determined experimentally and are consequently subject to measurement errors. It then becomes essential that any predictive tool for the simulation and design of plasmonic structures accounts for fabrication tolerances and measurement uncertainties.
In this paper, we develop a reduced order modeling framework that is capable of real-time accurate electromagnetic responses of plasmonic nanogap structures for a wide range of geometry and material parameters. The main ingredients of the proposed method are: (i) the hybridizable discontinuous Galerkin method to numerically solve the equations governing electromagnetic wave propagation in dielectric and metallic media, (ii) a reference domain formulation of the time-harmonic Maxwell's equations to account for geometry variations; and (iii) proper orthogonal decomposition and empirical interpolation techniques to construct an efficient reduced model. To demonstrate effectiveness of the models developed, we analyze geometry sensitivities and explore optimal designs of a 3D periodic annular nanogap structure.

[9]  arXiv:1710.06550 [pdf]
Title: Designing Planar, Ultra-Thin, Broad-Band and Material-Versatile Solar Absorbers via Bound-Electron and Exciton Absorption
Authors: Dong Liu, Lin Wang
Subjects: Applied Physics (physics.app-ph); Optics (physics.optics)

Ultrathin planar absorbing layers, including semiconductor and metal films, and 2D materials, are promising building blocks for solar energy harvesting devices but poor light absorption has been a critical issue. Although interference in ultrathin absorbing layers has been studied to realize near perfect absorption at a specific wavelength, achieving high broadband absorption still remains challenging. Here, we both theoretically and experimentally demonstrated a method to tune not only reflection phase shift but also electromagnetic energy dissipation to design broadband solar absorber with simple planar structure consisting of an ultrathin absorbing layer separated from the metallic substrate by a transparent layer. We explicitly identified by deriving a new formulism that the absorbing material with refractive index proportional to the wavelength as well as extinction coefficient independent of the wavelength, is the ideal building block to create ultrathin planar broadband absorbers. To demonstrate the general strategy for naturally available absorbing materials in both high-loss (refractory metals) and weak-absorption (2D materials) regimes, we leveraged the bound-electron interband transition with a broad Lorentz oscillator peak to design a solar thermal absorber based on a ultrathin Cr layer; and leveraged the strong exciton attributed to the spin-orbit coupling for the spectrum near the band edge, and the bound-electron interband transition for shorter wavelengths, to design a solar photovoltaic absorber based on a atomically thin MoS2 layer. Furthermore, our designed ultrathin broadband solar absorbers with planar structures have comparable absorption properties compared to the absorbers with nanopatterns. Our proposed design strategies pave the way to novel nanometer thick energy harvesting and optoelectronic devices with simple planar structures.

[10]  arXiv:1710.06558 [pdf, other]
Title: Diverse Trends of Electron Correlation Effects for Properties with Different Radial and Angular Factors in an Atomic System: A case study in Ca$^{+}$
Comments: 15 pages, 10 figures, 3 tables
Subjects: Atomic Physics (physics.atom-ph); Chemical Physics (physics.chem-ph); Computational Physics (physics.comp-ph); Quantum Physics (quant-ph)

Atomic properties such as field shift constants, magnetic dipole and electric quadrupole hyperfine structure constants, Land\'e $g_J$ factors, and electric quadrupole moments that are described by electronic operators with different ranks and radial behaviors are studied and the role of electron correlation effects in their determination are investigated. We have adopted the Dirac-Hartree-Fock method, the second- and third-order relativistic many-body perturbation theories, and an all-order relativistic many-body method in the coupled-cluster theory framework considering only the linearized terms and also all the non-linearized terms in the singles and doubles with partial triples excitations approximation to carry out these analyses. Variations in the propagation of electron correlation effects with operators having same angular factors but different radial behaviors and with different ranks are highlighted. Corrections from the higher-order relativistic corrections due to the Breit and quantum electrodynamics interactions to all these properties are also estimated. Understanding of trends of electron correlation effects in these properties can be useful to establish accuracies in the theoretical results of different atomic properties and to substantiate validity of an approximated many-body method.

[11]  arXiv:1710.06575 [pdf, ps, other]
Title: Polarized bound state in the continuum and resonances with tunable Q-factor in an anisotropic photonic crystal
Comments: 8 pages, 5 figures
Subjects: Optics (physics.optics)

We consider a one-dimensional photonic crystal composed of alternating layers of isotropic and anisotropic dielectric materials. Such a system has different band structures for different polarizations of light. We demonstrate that if an anisotropic defect layer is inserted into the structure, the crystal can support an optical bound state in the continuum. By tilting the principle dielectric axes of the defect layer relative to those of the photonic crystal we observe a long-lived resonance in the transmission spectrum. We derive an analytical expression for the decay rate of the resonance that agrees well with the numerical data by the Berreman anisotropic transfer matrix approach. An experimental set-up with a liquid crystal defect layer is proposed to tune the Q-factor of the resonance through applying an external electric field. We speculate that the set-up provides a simple and robust platform for observing optical bound states in the continuum in the form of resonances with tunable Q-factor.

[12]  arXiv:1710.06597 [pdf]
Title: Fingerprinting of Compound-Specific Chlorine Isotopologue Distribution of Organochlorines by GC-HRMS
Comments: 30 pages, 8 figures and 1 table
Subjects: Instrumentation and Detectors (physics.ins-det); Chemical Physics (physics.chem-ph)

This study developed a method to measure compound-specific chlorine isotopologue distribution of organochlorines for source identification and apportionment. Complete chlorine isotopologues of individual model organochlorines were detected by gas chromatography-high resolution mass spectrometry (GC-HRMS). The measured relative abundances (RAmea), simulated relative abundances (RAsim), and relative variations between RAmea and RAsim (${\Delta}$RA) were obtained on basis of the detected MS signal intensities of individual isotopologues. The method has been partially validated in precision, injection-amount dependency and temporal drifts. The standard deviations (SDs) of RAmea of all istotopologues of perchlorethylene (PCE) and trichloroethylene (TCE) from different manufacturers were 0.002%-0.069%. The SDs of ${\Delta}$RA of the first three isotopologues of PCE and TCE from different manufacturers were 0.026%-0.155%. The ${\Delta}$RA and ${\Delta}$RA patterns of the standards of PCE and TCE from different manufacturers were able to be differentiated with statistical significance. The method has been successfully applied to an analogous case of source identification and apportionment for two trichlorodiphenyls that exhibited significant chlorine isotope fractionation on the GC-HRMS system. The results demonstrate that the ${\Delta}$RA in conjunction with isotope ratios can be applied to source identification and present high-validity identification outcomes. Moreover, the RAmea can be used to implement source apportionment for organochlorines from more sources with more reliable outcomes compared with the methods using isotope ratios only. This method opens a new way to perform fingerprinting analysis of compound-specific chlorine isotopologue distribution of organochlorines, and will be a promising high-performance approach in source delineation and apportionment for chlorinated organic compounds.

[13]  arXiv:1710.06603 [pdf, ps, other]
Title: One-electron equation in terms of equivalent function and phase norm
Comments: 12 pages
Subjects: Chemical Physics (physics.chem-ph); Other Condensed Matter (cond-mat.other)

We present an alternative one-electron equation for resolving many-electron problem to one-electron approximation and including the exchange and correlation effects in an analytical way, thereby fulfilling the requirements for ab initio calculation. To derive one-electron equation, we accept a new notion of equivalent function suggestive of the pseudo wavefunction. As a result, we reduce many-electron equation to one-electron including the exchange effect in an analytical method. Moreover we accept the notion of phase norm for two electrons to resolve the electronic correlation problem. The phase norm is used to specify the electron-approachable limit between particles. We take into consideration the electronic correlation with the help of a correlation-hole function in terms of the phase norm, by which multiplying the integrand of the operator term representing the interaction between electrons. Using the phase norm leads to analytical consideration of the electronic correlation without employing in a factitious way the additional term pertaining to correlation, so it embodies the physical essence of electronic correlation. The derived equation becomes an one-electron equation which does not include an additional term pertaining to the exchange and correlation, but takes into consideration the exchange and correlation effects in a rigorous ab initio way.

[14]  arXiv:1710.06613 [pdf, other]
Title: Bayesian inversion of convolved hidden Markov models with applications in reservoir prediction
Comments: 35 pages, 14 figures
Subjects: Geophysics (physics.geo-ph); Applications (stat.AP)

Efficient assessment of convolved hidden Markov models is discussed. The bottom-layer is defined as an unobservable categorical first-order Markov chain, while the middle-layer is assumed to be a Gaussian spatial variable conditional on the bottom-layer. Hence, this layer appear as a Gaussian mixture spatial variable unconditionally. We observe the top-layer as a convolution of the middle-layer with Gaussian errors. Focus is on assessment of the categorical and Gaussian mixture variables given the observations, and we operate in a Bayesian inversion framework. The model is defined to make inversion of subsurface seismic AVO data into lithology/fluid classes and to assess the associated elastic material properties. Due to the spatial coupling in the likelihood functions, evaluation of the posterior normalizing constant is computationally demanding, and brute-force, single-site updating Markov chain Monte Carlo algorithms converges far too slow to be useful. We construct two classes of approximate posterior models which we assess analytically and efficiently using the recursive Forward-Backward algorithm. These approximate posterior densities are used as proposal densities in an independent proposal Markov chain Monte Carlo algorithm, to assess the correct posterior model. A set of synthetic realistic examples are presented. The proposed approximations provides efficient proposal densities which results in acceptance probabilities in the range 0.10-0.50 in the Markov chain Monte Carlo algorithm. A case study of lithology/fluid seismic inversion is presented. The lithology/fluid classes and the elastic material properties can be reliably predicted.

[15]  arXiv:1710.06629 [pdf, other]
Title: Machine learning based localization and classification with atomic magnetometers
Comments: Main text: 5 pages, 4 figures. Supplementary material: 7 pages, 7 figures
Subjects: Atomic Physics (physics.atom-ph); Applied Physics (physics.app-ph); Instrumentation and Detectors (physics.ins-det)

We demonstrate identification of position, material, orientation and shape of objects imaged by an $^{85}$Rb atomic magnetometer performing electromagnetic induction imaging supported by machine learning. Machine learning maximizes the information extracted from the images created by the magnetometer, demonstrating the use of hidden data. Localization 2.6 times better than the spatial resolution of the imaging system and successful classification up to 97$\%$ are obtained. This circumvents the need of solving the inverse problem, and demonstrates the extension of machine learning to diffusive systems such as low-frequency electrodynamics in media. Automated collection of task-relevant information from quantum-based electromagnetic imaging will have a relevant impact from biomedicine to security.

[16]  arXiv:1710.06634 [pdf, other]
Title: Demonstration of the length stability requirements for ALPS II with a high finesse 10m cavity
Subjects: Instrumentation and Detectors (physics.ins-det); Optics (physics.optics)

Light-shining-through-a-wall experiments represent a new experimental approach to search for undiscovered elementary particles not accessible with accelerator based experiments. The next generation of these experiments, such as ALPS II, require high finesse, long baseline optical cavities with fast length control. In this paper we report on a length stabilization control loop used to keep a cavity resonant with light at a wavelength of 532nm. It achieves a unity-gain-frequency of 4kHz and actuates on a mirror with a diameter of 50.8mm. This length control system was implemented on a 10m cavity and its projected performance meets the ALPS II requirements. The finesse of this cavity was measured to be 93,800$\pm$500 for 1064nm light, a value which is close to the design requirements for the ALPS II regeneration cavity.

[17]  arXiv:1710.06645 [pdf, ps, other]
Title: Planar Multi-link Swimmers: Experiments and Theoretical Investigation Using "Perfect Fluid" Model
Subjects: Fluid Dynamics (physics.flu-dyn)

Robotic swimmers are currently a subject of extensive research and development for several underwater applications. Clever design and planning must rely on simple theoretical models that account for the swimmer's hydrodynamics in order to optimize its structure and control inputs. In this work, we study a planar snake-like multi-link swimmer by using the "perfect fluid" model that accounts for inertial hydrodynamic forces while neglecting viscous drag effects. The swimmer's dynamic equations of motion are formulated and reduced into a first-order system due to symmetries and conservation of generalized momentum variables. Focusing on oscillatory inputs of joint angles, we study optimal gaits for 3-link and 5-link swimmers via numerical integration. For the 3-link swimmer, we also provide a small-amplitude asymptotic solution which enables obtaining closed-form approximations for optimal gaits. The theoretical results are then corroborated by experiments and motion measurement of untethered robotic prototypes with 3 and 5 links, showing a reasonable agreement between experiments and the theoretical model.

[18]  arXiv:1710.06667 [pdf, other]
Title: Algebraic motion of vertically displacing plasmas
Subjects: Plasma Physics (physics.plasm-ph)

The vertical displacement of a tokamak plasma is modelled during its non-linear phase by considering a free-moving current-carrying rod inductively coupled to a set of fixed conducting wires or a cylindrical conducting shell. The models capture the leading term in a Taylor expansion of the Green's function for the interaction between the plasma column and the surrounding vacuum vessel. The plasma shape and profiles are assumed not to vary during the vertical drifting phase such that the plasma column behaves as a rigid body. In the limit of perfectly conducting structures, the plasma is prevented to come in contact with the wall due to steep effective potential barriers created by the induced Eddy currents. Consequently, the plasma wire oscillates at Alfv\'enic frequencies about a given force-free position. In addition to damping oscillations, resistivity in the wall allows for the equilibrium point to drift towards the vessel on the slow timescale of flux penetration. The initial exponential motion of the plasma, understood as a resistive vertical instability, is succeeded by a non-linear "sinking" behaviour, that is analytically shown to be algebraic and decelerating. The acceleration of the plasma column often observed in experiments is thus conjectured to originate from an early sharing of toroidal current between the core, the halo plasma and the wall or from the thermal quench dynamics precipitating loss of plasma current.

[19]  arXiv:1710.06681 [pdf, other]
Title: Study of prototypes of LFoundry active and monolithic CMOS pixels sensors for the ATLAS detector
Comments: 11 pages, 12 figures, conference proceeding for PSD11
Subjects: Instrumentation and Detectors (physics.ins-det); High Energy Physics - Experiment (hep-ex)

High Energy Particle Physics experiments at the LHC use hybrid silicon detectors, in both pixel and strip geometry, for their inner trackers. These detectors have proven to be very reliable and performant. Nevertheless, there is great interest in the development of depleted CMOS silicon detectors, which could achieve similar performances at lower cost of production and complexity. We present recent developments of this technology in the framework of the ATLAS CMOS demonstrator project. In particular, studies of two active sensors from LFoundry, CCPD_LF and LFCPIX, and the first fully monolithic prototype MONOPIX will be shown.

[20]  arXiv:1710.06684 [pdf, other]
Title: Development and characterization of a laser-induced acoustic desorption source
Subjects: Chemical Physics (physics.chem-ph); Atomic and Molecular Clusters (physics.atm-clus)

A laser-induced acoustic desorption source, developed for use at central facilities, such as free-electron lasers, is presented. It features prolonged measurement times and a fixed interaction point. A novel sample deposition method using aerosol spraying provides a uniform sample coverage and hence stable signal intensity. Utilizing strong-field ionization as a universal detection scheme, the produced molecular plume is characterized in terms of number density, spatial extend, fragmentation, temporal distribution, translational velocity, and translational temperature. The effect of desorption laser intensity on these plume properties is evaluated. While translational velocity is invariant for different desorption laser intensities, pointing to a non-thermal desorption mechanism, the translational temperature increases significantly and higher fragmentation is observed with increased desorption laser fluence.

[21]  arXiv:1710.06687 [pdf]
Title: GPS scintillations associated with cusp dynamics and polar cap patches
Subjects: Space Physics (physics.space-ph)

This paper investigates the relative scintillation level associated with cusp dynamics (including precipitation, flow shears, etc.) with and without the formation of polar cap patches around the cusp inflow region by the EISCAT Svalbard radar (ESR) and two GPS scintillation receivers. A series of polar cap patches were observed by the ESR between 8:40 and 10:20 UT on December 3, 2011. The polar cap patches combined with the auroral dynamics were associated with a significantly higher GPS phase scintillation level (up to 0.6 rad) than those observed for the other two alternatives, i.e., cusp dynamics without polar cap patches, and polar cap patches without cusp aurora. The cusp auroral dynamics without plasma patches were indeed related to GPS phase scintillations at a moderate level (up to 0.3 rad). The polar cap patches away from the active cusp were associated with sporadic and moderate GPS phase scintillations (up to 0.2 rad). The main conclusion is that the worst global navigation satellite system space weather events on the dayside occur when polar cap patches enter the polar cap and are subject to particle precipitation and flow shears, which is analogous to the nightside when polar cap patches exit the polar cap and enter the auroral oval.

[22]  arXiv:1710.06688 [pdf]
Title: Statistical study of auroral omega bands
Subjects: Space Physics (physics.space-ph)

The presence of very few statistical studies on auroral omega bands motivated us to test-use a semi-automatic method for identifying large-scale undulations of the diffuse aurora boundary and to investigate their occurrence. Five identical all-sky cameras with overlapping fields of view provided data for 438 auroral omega-like structures over Fennoscandian Lapland from 1996 to 2007. The results from this set of omega band events agree remarkably well with previous observations of omega band occurrence in magnetic local time (MLT), lifetime, location between the region 1 and 2 field-aligned currents, as well as current density estimates. The average peak emission height of omega forms corresponds to the estimated precipitation energies of a few keV, which experienced no significant change during the events. Analysis of both local and global magnetic indices demonstrates that omega bands are observed during substorm expansion and recovery phases that are more intense than average substorm expansion and recovery phases in the same region. The omega occurrence with respect to the substorm expansion and recovery phases is in a very good agreement with an earlier observed distribution of fast earthward flows in the plasma sheet during expansion and recovery phases. These findings support the theory that omegas are produced by fast earthward flows and auroral streamers, despite the rarity of good conjugate observations.

[23]  arXiv:1710.06714 [pdf, other]
Title: Polarization-dependent electromagnetic responses of ultrathin and highly flexible asymmetric terahertz metasurfaces
Comments: 9 pages, 5 figures
Subjects: Applied Physics (physics.app-ph)

We report the polarization-dependent electromagnetic response from a series of novel terahertz (THz) metasurfaces where asymmetry is introduced through the displacement of two adjacent metallic arms separated by a distance $\delta$. For all polarization states, the symmetric metasurface exhibits a low quality (Q) factor fundamental dipole mode. By breaking the symmetry, we experimentally observe a secondary dipole-like mode with a Q factor nearly $9\times$ higher than the fundamental resonance. As $\delta$ increases, the fundamental dipole mode $f_{1}$ redshifts and the secondary mode $f_{2}$ blueshifts creating a highly transmissive spectral window. Polarization-dependent measurements reveal a full suppression of $f_{2}$ for all asymmetries at $\theta \geq 60^\circ$. Furthermore, at $\delta \geq 60 \text{ }\mu\text{m}$, we observe a polarization selective electromagnetic induced transparency (EIT) for the fundamental mode. This work paves the way for applications in filtering, sensing and slow-light devices common to other high Q factor THz metasurfaces with EIT-like response.

[24]  arXiv:1710.06717 [pdf]
Title: Vignetting effect in Fourier ptychographic microscopy
Comments: 5 pages, 5 figures
Subjects: Optics (physics.optics)

Fourier ptychographic microscopy (FPM) is a computational imaging technique that overcomes the physical space-bandwidth product (SBP) limit of a conventional microscope by applying angular diversity illuminations. In the usual model of FPM, the microscopic system is approximated as being space-invariant with transfer function determined by a complex pupil function of the objective. However, in real experimental conditions, several unexpected "semi-bright and semi-dark" images with strong vignetting effect can be easily observed when the sample is illuminated by the LED within the "transition zone" between bright field and dark field. These imperfect images, apparently, are not coincident with the space-invariant model and could deteriorate the reconstruction quality severely. In this Letter, we examine the impact of this space-invariant approximation on FPM image formation based on rigorous wave optics-based analysis. Our analysis shows that for a practical FPM microscope with a low power objective and a large field of view, the space invariance is destroyed by diffraction at other stops associated with different lens elements to a large extent. A modified version of the space-variant model is derived and discussed. Two simple countermeasures are also presented and experimentally verified to bypass or partially alleviate the vignetting-induced reconstruction artifacts.

[25]  arXiv:1710.06724 [pdf, other]
Title: Exploring the hidden interior of the Earth with directional neutrino measurements
Comments: 18 pages, 11 figures, 8 tables
Journal-ref: Nat. Commun. 8:15989 (2017)
Subjects: Geophysics (physics.geo-ph); High Energy Physics - Experiment (hep-ex); High Energy Physics - Phenomenology (hep-ph)

Roughly 40% of the Earth's total heat flow is powered by radioactive decays in the crust and mantle. Geo-neutrinos produced by these decays provide important clues about the origin, formation and thermal evolution of our planet, as well as the composition of its interior. Previous measurements of geo-neutrinos have all relied on the detection of inverse beta decay reactions, which are insensitive to the contribution from potassium and do not provide model-independent information about the spatial distribution of geo-neutrino sources within the Earth. Here we present a method for measuring previously unresolved components of Earth's radiogenic heating using neutrino-electron elastic scattering and low-background, direction-sensitive tracking detectors. We calculate the exposures needed to probe various contributions to the total geo-neutrino flux, specifically those associated to potassium, the mantle and the core. The measurements proposed here chart a course for pioneering exploration of the veiled inner workings of the Earth.

[26]  arXiv:1710.06728 [pdf, other]
Title: Photonic network random lasing in the Anderson localized regime
Subjects: Optics (physics.optics)

Classical and quantum optical devices rely on the powerful light trapping and transporting architectures offered by nanophotonic systems. These properties derive from the way the optical modes are sculpture by multiple scattering. Here we propose a graph approach to nanophotonics, and a network platform to design of light-matter interaction. We report a photonic network built from recurrent scattering in a mesh of subwavelength waveguides, with Anderson-localized network modes. These modes are designed via the network connectivity and topology and can be modeled by a graph description of Maxwell's equations. The photonic networks sustain random lasing action and exhibit lasing thresholds and optical properties which are determined by the network topology. Photonic network lasers are promising new device architectures for sensitive biosensing and for developing on-chip tunable laser sources for future information processing.

[27]  arXiv:1710.06730 [pdf, other]
Title: Highly Viscous Microjet Generator
Comments: 7 pages, 8 figures
Subjects: Fluid Dynamics (physics.flu-dyn)

This paper describes a simple yet novel system for generating a highly viscous microjet. The jet is produced inside a wettable thin tube partially submerged in a liquid. The gas-liquid interface inside the tube, which is initially concave, is kept much deeper than that outside the tube. An impulsive force applied at the bottom of a liquid container leads to significant acceleration of the liquid inside the tube followed by flow-focusing due to the concave interface. The jet generation process can be divided into two parts that occur in different time scales, i.e. the Impact time (impact duration $\le O(10^{-4})$ s) and Focusing time (focusing duration $\gg O(10^{-4})$ s). In Impact time, the liquid accelerates suddenly due to the impact. In Focusing time, the microjet emerges due to flow-focusing. In order to explain the sudden acceleration inside the tube in Impact time, we develop a physical model based on a pressure impulse approach. Numerical simulations confirm the proposed model, indicating that the basic mechanism of the acceleration of the liquid due to the impulsive force is elucidated. Remarkably, the viscous effect is negligible in Impact time. In contrast, in Focusing time, the viscosity plays an important role in the microjet generation. We experimentally and numerically investigate the velocity of microjets with various viscosities. We find that higher viscosities lead to reduction of the jet velocity, which can be described by using Reynolds number (the ratio between the inertia force and the viscous force). This novel device may be a starting point for next-generation technologies, such as high-viscosity inkjet printers including bioprinters and needle-free injection devices for minimally invasive medical treatments.

[28]  arXiv:1710.06765 [pdf, ps, other]
Title: Effective slip length of confined fluid with wavy fluid-solid interfaces
Comments: 5pages, 4 figures
Subjects: Fluid Dynamics (physics.flu-dyn)

We have studied the effective slip length of confined fluid with nano-structured fluid-solid interfaces. A formula bridging the effective slip length and nano structures of the interfaces has been obtained analytically. For the application of the formula, a confined fluid with wavy fluid-solid interfaces has been studied as an example. In the study, the criteria of the formula have been detailed, and verified by the finite element method.

[29]  arXiv:1710.06767 [pdf]
Title: Web interface for reflectivity fitting
Comments: 7 pages, 4 figures
Subjects: Data Analysis, Statistics and Probability (physics.data-an); Materials Science (cond-mat.mtrl-sci); Instrumentation and Detectors (physics.ins-det)

The Liquids Reflectometer at Oak Ridge National Laboratory provides neutron reflectivity capability for an average of about 30 experiments each year. In recent years, there has been a large effort to streamline the data processing and analysis for the instrument. While much of the data reduction can be automated, data analysis remains something that needs to be done by scientists. For this purpose, we present a reflectivity fitting web interface that captures the process of setting up and executing fits while reducing the need for installing software or writing Python scripts.

[30]  arXiv:1710.06772 [pdf, other]
Title: The Hawking radiation in massive gravity: Path integral and the Bogoliubov method
Comments: 14 pages, 1 figure
Subjects: General Physics (physics.gen-ph)

We proof the consistency of the different approaches for deriving the black-hole radiation for the spherically symmetric case inside the theory of massive gravity. By comparing the results obtained by using the Bogoliubov transformations with those obtained by using the path-integral formulation, we find that in both cases the presence of the extra-degrees of freedom create the effect of extra-particles creation due to the distortions on the notions of time defined by the different observers at large scales. This however does not mean extra-particle creation at the horizon level.

[31]  arXiv:1710.06773 [pdf, other]
Title: Is stripe incommensurability in La_{2-x}Sr_xCoO_4 proportional to doping?
Authors: Manfred Bucher
Comments: 8 pages, 4 figures
Subjects: General Physics (physics.gen-ph)

The longstanding notion of stripe incommensurability being proportional to doping, \delta(x) ~ x, in lanthanum transition-metal oxides, La_{2-x}Sr_xTmO_4 (Tm = Cu, Ni, Co), is partly borne out by experiment but also plagued with exceptions. Future neutron-scattering experiments on cobaltates could provide a clear distinction whether a linear or square-root dependence, \delta(x) ~ sqrt(x - x_0), is valid.

[32]  arXiv:1710.06779 [pdf, other]
Title: Application of Surface Coil for Nuclear Magnetic Resonance Studies of Semi-conducting Thin Films
Comments: 7 pages, 9 figures
Subjects: Instrumentation and Detectors (physics.ins-det); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Materials Science (cond-mat.mtrl-sci); Superconductivity (cond-mat.supr-con)

We conduct a comprehensive set of tests of performance of surface coils used for nuclear magnetic resonance (NMR) study of quasi 2-dimensional samples. We report ${^{115} \rm{In}}$ and ${^{31} \rm{P}}$ NMR measurements on InP, semi-conducting thin substrate samples. Surface coils of both zig-zag meander-line and concentric spiral geometries were used. We compare reception sensitivity and signal-to-noise ratio (SNR) of NMR signal obtained by using surface-type coils to that obtained by standard solenoid-type coils. As expected, we find that surface-type coils provide better sensitivity for NMR study of thin films samples. Moreover, we compare the reception sensitivity of different types of the surface coils. We identify the optimal geometry of the surface coils for a given application and/or direction of the applied magnetic field.

[33]  arXiv:1710.06792 [pdf]
Title: Dark states and delocalization: competing effects of quantum coherence on the efficiency of light harvesting systems
Subjects: Chemical Physics (physics.chem-ph); Optics (physics.optics)

Natural light harvesting systems exploit electronic coupling of identical chromophores to generate efficient and robust excitation transfer and conversion. Dark states created by strong coupling between chromophores in the antenna structure can significantly reduce radiative recombination and enhance energy conversion efficiency. Increasing the number of the chromophores increases the number of dark states and the associated enhanced energy conversion efficiency, yet also delocalizes excitations away from the trapping center and reduces the energy conversion rate. Therefore, a competition between dark state protection and delocalization must be considered when designing the optimal size of a light harvesting system. In this study, we explore the two competing mechanisms in a chain-structured antenna and show that dark state protection is the dominant mechanism, with an intriguing dependence on the parity of the number of chromophores. This dependence is linked to the exciton distribution among eigenstates which is strongly affected by the coupling strength between chromophores and the temperature. Combining these findings, we propose that increasing the coupling strength between the chromophores can significantly increase the power output of the light harvesting system.

[34]  arXiv:1710.06817 [pdf]
Title: Using MRI Cell Tracking to Monitor Immune Cell Recruitment in Response to a Peptide-Based Cancer Vaccine
Comments: 8 figures, supporting materials, will be submitted to Magnetic Resonance in Medicine
Subjects: Medical Physics (physics.med-ph); Tissues and Organs (q-bio.TO)

Purpose: MRI cell tracking can be used to monitor immune cells involved in the immunotherapy response, providing insight into the mechanism of action, temporal progression of tumour growth and individual potency of therapies. To evaluate whether MRI could be used to track immune cell populations in response to immunotherapy, CD8+ cytotoxic T cells (CTLs), CD4+CD25+FoxP3+ regulatory T cells (Tregs) and myeloid derived suppressor cells (MDSCs) were labelled with superparamagnetic iron oxide (SPIO) particles.
Methods: SPIO-labelled cells were injected into mice (one cell type/mouse) implanted with an HPV-based cervical cancer model. Half of these mice were also vaccinated with DepoVaxTM, a lipid-based vaccine platform that was developed to enhance the potency of peptide-based vaccines.
Results: MRI visualization of CTLs, Tregs and MDSCs was apparent 24 hours post-injection, with hypointensities due to iron labelled cells clearing approximately 72 hours post-injection. Vaccination resulted in increased recruitment of CTLs and decreased recruitment of MDSCs and Tregs to the tumour. We also found that MDSC and Treg recruitment was positively correlated with final tumour volume.
Conclusion: This type of analysis can be used to non-invasively study changes in immune cell recruitment in individual mice over time, potentially allowing improved application and combination of immunotherapies.

[35]  arXiv:1710.06819 [pdf, other]
Title: Parity Nononserving Nuclear Spin Coupling in Molecules
Comments: 7 pages, 2 figures
Subjects: Chemical Physics (physics.chem-ph)

The weak interaction does not conserve parity, which is apparent in many nuclear and atomic phenomena. However, thus far, parity nonconservation has not been observed in molecules. Here we consider nuclear-spin-dependent parity nonconserving contributions to the molecular Hamiltonian. These contributions give rise to a parity nonconserving indirect nuclear spin-spin coupling which can be distinguished from parity conserving interactions in molecules of appropriate symmetry, including diatomic molecules. We estimate the magnitude of the coupling, taking into account relativistic corrections. Finally, we propose and simulate an experiment to detect the parity nonconserving coupling using liquid-state zero-field nuclear magnetic resonance of electrically oriented molecules and show that $^{1}$H$^{19}$F should give signals within the detection limits of current atomic vapor-cell magnetometers.

[36]  arXiv:1710.06829 [pdf, other]
Title: A Systematic Approach to Numerical Dispersion in Maxwell Solvers
Comments: accepted to Computer Physics Communications
Subjects: Plasma Physics (physics.plasm-ph); Computational Physics (physics.comp-ph)

The finite-difference time-domain (FDTD) method is a well established method for solving the time evolution of Maxwell's equations. Unfortunately the scheme introduces numerical dispersion and therefore phase and group velocities which deviate from the correct values. The solution to Maxwell's equations in more than one dimension results in non-physical predictions such as numerical dispersion or numerical Cherenkov radiation emitted by a relativistic electron beam propagating in vacuum.
Improved solvers, which keep the staggered Yee-type grid for electric and magnetic fields, generally modify the spatial derivative operator in the Maxwell-Faraday equation by increasing the computational stencil. These modified solvers can be characterized by different sets of coefficients, leading to different dispersion properties. In this work we introduce a norm function to rewrite the choice of coefficients into a minimization problem. We solve this problem numerically and show that the minimization procedure leads to phase and group velocities that are considerably closer to $c$ as compared to schemes with manually set coefficients available in the literature. Depending on a specific problem at hand (e.g. electron beam propagation in plasma, high-order harmonic generation from plasma surfaces, etc), the norm function can be chosen accordingly, for example, to minimize the numerical dispersion in a certain given propagation direction. Particle-in-cell simulations of an electron beam propagating in vacuum using our solver are provided.

[37]  arXiv:1710.06833 [pdf]
Title: Emission enhancement in dielectric nanocomposites
Subjects: Optics (physics.optics)

We show that radiative decay in dielectric nanocomposite is greatly affected by the shape and arrangement of its constituents. For the same fractions of constituting materials the radiative decay rate can differ by orders of magnitude. E.g. for the case of diluted luminescent nanoparticles with refractive index of 1.43 inside a host with refractive index of 3.5 we show that one can achieve broadband Purcell factors of up to 40, which is of the same order as what can be achieved for a single frequency with deliberately patterned high Q dielectric resonators. Further, we discuss the fact that the Purcell factor is a spatially inhomogenous quantity and we present a simple way to calculate the average Purcell factor in arbitrary nanocomposites based on the reciprocity theorem and a quasistatic approximation. It is shown that in dielectric nanocomposites a low index luminescent medium should occupy gaps between high index particles to achieve maximal Purcell enhancement.

Cross-lists for Thu, 19 Oct 17

[38]  arXiv:1710.06304 (cross-list from cs.CV) [pdf, other]
Title: Towards CT-quality Ultrasound Imaging using Deep Learning
Subjects: Computer Vision and Pattern Recognition (cs.CV); Image and Video Processing (eess.IV); Medical Physics (physics.med-ph)

The cost-effectiveness and practical harmlessness of ultrasound imaging have made it one of the most widespread tools for medical diagnosis. Unfortunately, the beam-forming based image formation produces granular speckle noise, blurring, shading and other artifacts. To overcome these effects, the ultimate goal would be to reconstruct the tissue acoustic properties by solving a full wave propagation inverse problem. In this work, we make a step towards this goal, using Multi-Resolution Convolutional Neural Networks (CNN). As a result, we are able to reconstruct CT-quality images from the reflected ultrasound radio-frequency(RF) data obtained by simulation from real CT scans of a human body. We also show that CNN is able to imitate existing computationally heavy despeckling methods, thereby saving orders of magnitude in computations and making them amenable to real-time applications.

[39]  arXiv:1710.06601 (cross-list from cond-mat.mtrl-sci) [pdf, other]
Title: Strong Coupling of 3D Cavity Photons to Travelling Magnons At Low Temperatures
Subjects: Materials Science (cond-mat.mtrl-sci); Applied Physics (physics.app-ph); Quantum Physics (quant-ph)

We demonstrate strong coupling between travelling magnons in an Yttrium Iron Garnet film and 3D microwave cavity photons at milli-Kelvin temperatures. The coupling strength of $350$MHz or $7.3$\% of resonance frequency is observed. The magnonic subsystem is represented by the Damon-Eshbach magnetostatic surface wave with a distribution of wave numbers giving the linewidth of 15MHz. The ways to improve this parameter are discussed. The energy gap in the spectrum given by the Zeeman energy and the shape-anisotropy energy in the film geometry give rise to a significant asymmetry of the double peak structure of the photon-magnon avoided level crossing. A structure of two parallel YIG films is investigated using the same re-entrant magnetostatic surface wave transducer revealing a higher order magnon modes existing in both films. Combination of a multi-post re-entrant cavity and multiple films is a potential base for engineering both magnon and photon spectra.

[40]  arXiv:1710.06609 (cross-list from cs.SI) [pdf, other]
Title: Supervised and Extended Restart in Random Walks for Ranking and Link Prediction in Networks
Subjects: Social and Information Networks (cs.SI); Physics and Society (physics.soc-ph)

Given a real-world graph, how can we measure relevance scores for ranking and link prediction? Random walk with restart (RWR) provides an excellent measure for this and has been applied to various applications such as friend recommendation, community detection, anomaly detection, etc. However, RWR suffers from two problems: 1) using the same restart probability for all the nodes limits the expressiveness of random walk, and 2) the restart probability needs to be manually chosen for each application without theoretical justification. We have two main contributions in this paper. First, we propose Random Walk with Extended Restart (RWER), a random walk based measure which improves the expressiveness of random walks by using a distinct restart probability for each node. The improved expressiveness leads to superior accuracy for ranking and link prediction. Second, we propose SuRe (Supervised Restart for RWER), an algorithm for learning the restart probabilities of RWER from a given graph. SuRe eliminates the need to heuristically and manually select the restart parameter for RWER. Extensive experiments show that our proposed method provides the best performance for ranking and link prediction tasks, improving the MAP (Mean Average Precision) by up to 15.8% on the best competitor.

[41]  arXiv:1710.06611 (cross-list from stat.AP) [pdf, other]
Title: An inferential procedure for community structure validation in networks
Subjects: Applications (stat.AP); Social and Information Networks (cs.SI); Physics and Society (physics.soc-ph); Methodology (stat.ME)

`Community structure' is a commonly observed feature of real networks. The term refers to the presence in a network of groups of nodes (communities) that feature high internal connectivity and are poorly connected to each other. Whereas the issue of community detection has been addressed in several works, the problem of validating a partition of nodes as a good community structure for a network has received little attention and remains an open issue. We propose an inferential procedure for community structure validation of network partitions, which relies on concepts from network enrichment analysis. The proposed procedure allows to compare the adequacy of different partitions of nodes as community structures. Moreover, it can be employed to assess whether two networks share the same community structure, and to compare the performance of different network clustering algorithms.

[42]  arXiv:1710.06624 (cross-list from astro-ph.IM) [pdf, other]
Title: Non-Gaussian Error Distributions of Galactic Rotation Speed Measurements
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); Astrophysics of Galaxies (astro-ph.GA); Data Analysis, Statistics and Probability (physics.data-an)

We construct the error distribution of galactic rotation curve ($\Theta$) measurements using 134 data points from the 162 measurements compiled in De Grijs et al. (arXiv:1709.02501), following the same procedures used in previous works by Ratra and collaborators. We determine the weighted mean of these measurements to be $\Theta_{Mean} = 226.73 \pm 0.70$ km/sec and the median estimate is calculated to be $\Theta_{Med} = 234.66\pm 0.58$ km/sec. We also checked if the error distribution (constructed using both the weighted mean and median as the estimate) shows a Gaussian distribution. We find using both the estimates that it has much wider tails than a Gaussian distribution. We also tried to fit the data to four distributions: Gaussian, Cauchy, double-exponential, and Students-t. The best fit is obtained using the Students-$t$ distribution for $n=2$ using the median value as the central estimate, corresponding to $p$-value of 0.19. All other distributions provide poorer fits to the data.

[43]  arXiv:1710.06650 (cross-list from hep-ex) [pdf, other]
Title: Limits on light WIMPs with a 1 kg-scale germanium detector at 160 eVee physics threshold at the China Jinping Underground Laboratory
Authors: Li-Tao Yang (1 and 2), Hau-Bin Li (3), Qian Yue (1), Ke-Jun Kang (1), Jian-Ping Cheng (1), Yuan-Jing Li (1), Henry Tsz-King Wong (3), M. Aǧartioǧlu (3), Hai-Peng An (1 and 2), Jian-Ping Chang (4), Jing-Han Chen (3), Yun-Hua Chen (5), Zhi Deng (1), Qiang Du (6), Hui Gong (1), Li He (4), Jin-Wei Hu (1), Qing-Dong Hu (1), Han-Xiong Huang (7), Li-Ping Jia (1), Hao Jiang (1), Hong Li (4), Jian-Min Li (1), Jin Li (1), Xia Li (7), Xue-Qian Li (8), Yu-Lan Li (1), Fong-Kay Lin (3), Shin-Ted Lin (6), Shu-Kui Liu (6), Zhong-Zhi Liu (1), Hao Ma (1), Jing-Lu Ma (1), Hui Pan (4), Jie Ren (7), Xi-Chao Ruan (7), B. Sevda (3), Vivek Sharma (3 and 9), Man-Bin Shen (5), Lakhwinder Singh (3 and 9), Manoj Kumar Singh (3 and 9), Chang-Jian Tang (6), Wei-You Tang (1), Yang Tian (1), Ji-Min Wang (5), et al. (23 additional authors not shown)
Comments: 8 pages, 8 figures
Subjects: High Energy Physics - Experiment (hep-ex); Instrumentation and Detectors (physics.ins-det)

We report results of a search for light weakly interacting massive particles (WIMPs) dark matter from CDEX-1 experiment at the China Jinping Underground Laboratory (CJPL). Constraints on WIMP-nucleon spin-independent (SI) and spin-dependent (SD) couplings are derived with a physics threshold of 160 eVee, from an exposure of 737.1 kg-days. The SI and SD limits extend the lower reach of light WIMPs to 2 GeV and improve over our earlier bounds at WIMPs mass less than 6 GeV.

[44]  arXiv:1710.06661 (cross-list from cond-mat.stat-mech) [pdf, other]
Title: Adiabatic elimination of inertia of the stochastic microswimmer driven by $α-$stable noise
Subjects: Statistical Mechanics (cond-mat.stat-mech); Biological Physics (physics.bio-ph)

We consider a microswimmer that moves in two dimensions at a constant speed and changes the direction of its motion due to a torque consisting of a constant and a fluctuating component. The latter will be modeled by a symmetric L\'evy-stable ($\alpha$-stable) noise. The purpose is to develop a kinetic approach to eliminate the angular component of the dynamics in order to find a coarse grained description in the coordinate space. By defining the joint probability density function of the position and of the orientation of the particle through the Fokker-Planck equation, we derive transport equations for the position-dependent marginal density, the particle's mean velocity and the velocity's variance. At time scales larger than the relaxation time of the torque $\tau_{\phi}$ the two higher moments follow the marginal density, and can be adiabatically eliminated. As a result, a closed equation for the marginal density follows. This equation which gives a coarse-grained description of the microswimmer's positions at time scales $t\gg \tau_{\phi}$, is a diffusion equation with a constant diffusion coefficient depending on the properties of the noise. Hence, the long time dynamics of a microswimmer can be described as a normal, diffusive, Brownian motion with Gaussian increments.

[45]  arXiv:1710.06736 (cross-list from quant-ph) [pdf, other]
Title: Temporal-mode-selective optical Ramsey interferometry via cascaded frequency conversion
Comments: 6 pages, 5 figures
Subjects: Quantum Physics (quant-ph); Optics (physics.optics)

Temporal modes (TM) are a new basis for storage and retrieval of quantum information in states of light. The full TM manipulation toolkit requires a practical quantum pulse gate (QPG), which is a device that unitarily maps any given TM component of the optical input field onto a different, easily separable subspace or degree of freedom. An ideal QPG must "separate" the selected TM component with unit efficiency, whilst avoiding crosstalk from orthogonal TMs. All attempts at implementing QPGs in pulsed-pump traveling-wave systems have been unable to satisfy both conditions simultaneously. This is due to a known selectivity limit in processes that rely on spatio-temporally local, nonlinear interactions between pulsed modes traveling at independent group velocities. This limit is a consequence of time ordering in the quantum dynamical evolution, which is predicted to be overcome by coherently cascading multiple stages of low-efficiency, but highly TM-discriminatory QPGs. Multi-stage interferometric quantum frequency conversion in nonlinear waveguides was first proposed for precisely this purpose. TM-nonselective cascaded frequency conversion, also called optical Ramsey interferometry, has recently been demonstrated with continuous-wave (CW) fields. Here, we present the first experimental demonstration of TM-selective optical Ramsey interferometry and show a significant enhancement in TM selectivity over single-stage schemes.

[46]  arXiv:1710.06740 (cross-list from quant-ph) [pdf, other]
Title: High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors
Subjects: Quantum Physics (quant-ph); Superconductivity (cond-mat.supr-con); Instrumentation and Detectors (physics.ins-det)

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

[47]  arXiv:1710.06755 (cross-list from astro-ph.IM) [pdf]
Title: Variations on a classical theme: On the formal relationship between magnitudes per square arcsecond and luminance
Authors: Salvador Bará
Comments: Accepted version, to be published in International Journal of Sustainable Lighting, www.lightingjournal.org
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); Optics (physics.optics)

The formal link between magnitudes per square arcsecond and luminance is discussed in this paper. Directly related to the human visual system, luminance is defined in terms of the spectral radiance of the source, weighted by the CIE V($\lambda$) luminous efficiency function, and scaled by the 683 lm/W luminous efficacy constant. In consequence, any exact and spectrum-independent relationship between luminance and magnitudes per square arcsecond requires that the latter be measured precisely in the CIE V($\lambda$) band. The luminance value corresponding to m_VC=0 (zero-point of the CIE V($\lambda$) magnitude scale) depends on the reference source chosen for the definition of the magnitude system. Using absolute AB magnitudes, the zero-point luminance of the CIE V($\lambda$) photometric band is 10.96 x 10^4 cd/m^2.

[48]  arXiv:1710.06827 (cross-list from cs.CE) [pdf, other]
Title: A non-ordinary peridynamics implementation for anisotropic materials
Subjects: Computational Engineering, Finance, and Science (cs.CE); Computational Physics (physics.comp-ph)

Peridynamics (PD) represents a new approach for modelling fracture mechanics, where a continuum domain is modelled through particles connected via physical bonds. This formulation allows us to model crack initiation, propagation, branching and coalescence without special assumptions. Up to date, anisotropic materials were modelled in the PD framework as different isotropic materials (for instance, fibre and matrix of a composite laminate), where the stiffness of the bond depends on its orientation. A non-ordinary state-based formulation will enable the modelling of generally anisotropic materials, where the material properties are directly embedded in the formulation. Other material models include rocks, concrete and biomaterials such as bones. In this paper, we implemented this model and validated it for anisotropic composite materials. A composite damage criterion has been employed to model the crack propagation behaviour. Several numerical examples have been used to validate the approach, and compared to other benchmark solution from the finite element method (FEM) and experimental results when available.

Replacements for Thu, 19 Oct 17

[49]  arXiv:1412.5409 (replaced) [pdf, other]
Title: Numerical method for solving electromagnetic scattering problem by many small impedance bodies
Authors: Nhan Tran
Comments: 13 pages, 3 figures
Subjects: Classical Physics (physics.class-ph); Computational Physics (physics.comp-ph)
[50]  arXiv:1504.07064 (replaced) [pdf, other]
Title: Transient growth calculations obtained directly from the Orr-Sommerfeld matrices
Authors: Lennon O'Naraigh
Comments: 22 pages, 10 figures; a report on a computational methology for transient-growth calculations in stability theory of two-phase stratified flows
Subjects: Fluid Dynamics (physics.flu-dyn)
[51]  arXiv:1606.03967 (replaced) [pdf, ps, other]
Title: Unscrambling the Omelette of Quantum Contextuality (PART 1): Preexistent Properties or Measurement Outcomes?
Comments: Welcome!
Subjects: Quantum Physics (quant-ph); History and Philosophy of Physics (physics.hist-ph)
[52]  arXiv:1609.03416 (replaced) [pdf, other]
Title: Characterization of two distant double-slits by chaotic light second-order interference
Comments: 9 pages, 3 figures
Journal-ref: Scientific Reports 7, 2247 (2017)
Subjects: Quantum Physics (quant-ph); Optics (physics.optics)
[53]  arXiv:1611.03325 (replaced) [pdf, ps, other]
Title: Effects of Fieldline Topology on Energy Propagation in the Corona
Comments: 14 pages, 15 figures
Journal-ref: (2016) ApJ, 832, 150
Subjects: Solar and Stellar Astrophysics (astro-ph.SR); Plasma Physics (physics.plasm-ph); Space Physics (physics.space-ph)
[54]  arXiv:1612.08228 (replaced) [pdf, other]
Title: The misleading narrative of the canonical faculty productivity trajectory
Comments: 18 pages, 16 figures
Subjects: Digital Libraries (cs.DL); Physics and Society (physics.soc-ph)
[55]  arXiv:1702.00441 (replaced) [pdf, ps, other]
Title: Quantifying the Tangling of Trajectories Using the Topological Entropy
Comments: 11 pages, 9 figures
Journal-ref: Chaos 27, 093102 (2017); doi: http://dx.doi.org/10.1063/1.5000812
Subjects: Plasma Physics (physics.plasm-ph); Chaotic Dynamics (nlin.CD); Fluid Dynamics (physics.flu-dyn)
[56]  arXiv:1706.04051 (replaced) [pdf, other]
Title: Center of mass acceleration in coupled nanowaveguides due to transverse optical beating force
Comments: 9 pages, 4 figures
Subjects: Optics (physics.optics); Applied Physics (physics.app-ph)
[57]  arXiv:1706.09388 (replaced) [pdf, other]
Title: Striped states in a many-body system of tilted dipoles
Comments: 9 pages, 7 figures
Subjects: Quantum Gases (cond-mat.quant-gas); Atomic Physics (physics.atom-ph)
[58]  arXiv:1706.09636 (replaced) [pdf, ps, other]
Title: Inertial focusing of finite-size particles in microchannels
Comments: 17 pages, 9 figures
Subjects: Fluid Dynamics (physics.flu-dyn)
[59]  arXiv:1707.01729 (replaced) [pdf, other]
Title: Observation of collisions between cold Li atoms and Yb$^+$ ions
Comments: 8 pages, 7 figures (including appendices)
Journal-ref: Phys. Rev. A 96, 030703(R) (2017)
Subjects: Atomic Physics (physics.atom-ph)
[60]  arXiv:1707.07771 (replaced) [pdf, other]
Title: Covariations in ecological scaling laws fostered by community dynamics
Comments: S.Z. and A.G. contributed equally to this work
Journal-ref: Proceedings of the National Academy of Sciences, 114(40), 10672-10677
Subjects: Populations and Evolution (q-bio.PE); Adaptation and Self-Organizing Systems (nlin.AO); Biological Physics (physics.bio-ph); Data Analysis, Statistics and Probability (physics.data-an); Quantitative Methods (q-bio.QM)
[61]  arXiv:1707.08429 (replaced) [pdf, ps, other]
Title: Kinetic cascade in solar-wind turbulence: 3D3V hybrid-kinetic simulations with electron inertia
Comments: 6 pages, 5 figures, final version published in The Astrophysical Journal Letters: Cerri, Servidio & Califano, ApJL 846, L18 (2017)
Journal-ref: 2017 ApJL 846 L18
Subjects: Plasma Physics (physics.plasm-ph); Solar and Stellar Astrophysics (astro-ph.SR); Space Physics (physics.space-ph)
[62]  arXiv:1708.00181 (replaced) [pdf, other]
Title: Halo-independence with quantified maximum entropy at DAMA/LIBRA
Authors: Andrew Fowlie
Comments: 16 pages, 6 figures. Matches published version. Comments about isotropy added
Journal-ref: JCAP 1710 (2017) no.10, 002
Subjects: High Energy Physics - Phenomenology (hep-ph); Data Analysis, Statistics and Probability (physics.data-an)
[63]  arXiv:1708.04111 (replaced) [pdf]
Title: Current-induced magnetization switching in atom-thick tungsten engineered perpendicular magnetic tunnel junctions with large tunnel magnetoresistance
Comments: 21 pages, 5 figures
Subjects: Applied Physics (physics.app-ph)
[64]  arXiv:1708.07246 (replaced) [pdf, other]
Title: Path integral Monte Carlo simulations of dense carbon-hydrogen plasmas
Comments: 14 pages, 13 figures, 1 table;
Subjects: Plasma Physics (physics.plasm-ph); Earth and Planetary Astrophysics (astro-ph.EP); Solar and Stellar Astrophysics (astro-ph.SR); Other Condensed Matter (cond-mat.other); Chemical Physics (physics.chem-ph)
[65]  arXiv:1709.09210 (replaced) [pdf, other]
Title: Electrochemical Capacitance of CO-terminated Pt(111) is Dominated by CO-Solvent Gap
Comments: 5 pages, 3 figures, 2 tables
Journal-ref: J. Phys. Chem. Lett., (2017)
Subjects: Chemical Physics (physics.chem-ph); Materials Science (cond-mat.mtrl-sci)
[66]  arXiv:1710.02228 (replaced) [pdf, other]
Title: Extremes, intermittency and time reversibility of atmospheric turbulence at the cross-over from production to inertial scales
Subjects: Fluid Dynamics (physics.flu-dyn)
[67]  arXiv:1710.06054 (replaced) [pdf]
Title: Rapid and Quantitative Chemical Exchange Saturation Transfer (CEST) Imaging with Magnetic Resonance Fingerprinting (MRF)
Comments: 32 pages, 6 figures, 4 tables
Subjects: Medical Physics (physics.med-ph)
[ total of 67 entries: 1-67 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)