We gratefully acknowledge support from
the Simons Foundation and member institutions.

Instrumentation and Methods for Astrophysics

New submissions

[ total of 10 entries: 1-10 ]
[ showing up to 2000 entries per page: fewer | more ]

New submissions for Tue, 25 Jan 22

[1]  arXiv:2201.08880 [pdf, other]
Title: Development and characterization of a fast and low noise readout for the next generation X-ray CCDs
Comments: Submitted in Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); High Energy Astrophysical Phenomena (astro-ph.HE); High Energy Physics - Experiment (hep-ex)

The broad energy response, low electronic read noise, and good energy resolution have made X-ray Charge-Coupled Devices (CCDs) an obvious choice for developing soft X-ray astronomical instruments over the last half century. They also come in large array formats with small pixel sizes which make them a potential candidate for the next generation astronomical X-ray missions. However, the next generation X-ray telescopic experiments propose for significantly larger collecting area compared to the existing observatories in order to explore the low luminosity and high redshift X-ray universe which requires these detectors to have an order of magnitude faster readout. In this context, the Stanford University (SU) in collaboration with the Massachusetts Institute of Technology (MIT) has initiated the development of fast readout electronics for X-ray CCDs. At SU, we have designed and developed a fast and low noise readout module with the goal of achieving a readout speed of 5 Mpixel/s. We successfully ran a prototype CCD matrix of 512 $\times$ 512 pixels at 4 Mpixels/s. In this paper, we describe the details of the readout electronics and report the performance of the detectors at these readout speeds in terms of read noise and energy resolution. In the future, we plan to continue to improve performance of the readout module and eventually converge to a dedicated ASIC based readout system to enable parallel read out of large array multi-node CCD devices.

[2]  arXiv:2201.09482 [pdf, other]
Title: Optimizing Gravitational-Wave Detector Design for Squeezed Light
Comments: Submitted to PRD
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM); Instrumentation and Detectors (physics.ins-det)

Squeezed light is critical in gravitational-wave detection for reaching sensitivities below the standard quantum limit. Achieving the quantum noise targets of third-generation detectors will require 10 dB of squeezing as well as megawatt laser power in the interferometer arms - both of which require unprecedented control of the internal optical losses. In this work, we present a novel optimization approach to gravitational-wave detector design aimed at maximizing the robustness to common, yet unavoidable, optical fabrication and installation errors, which have caused significant loss in Advanced LIGO. As a proof of concept, we employ these techniques to perform a two-part optimization of the LIGO A+ design. First, we optimize the arm cavities for reduced scattering loss in the presence of point absorbers, as currently limit the operating power of Advanced LIGO. Then, we optimize the signal recycling cavity for maximum squeezing performance, accounting for realistic errors in the positions and radii of curvature of the optics. Our findings suggest that these techniques can be leveraged to achieve substantially greater quantum noise performance in current and future gravitational-wave detectors.

Cross-lists for Tue, 25 Jan 22

[3]  arXiv:2201.08967 (cross-list from astro-ph.SR) [pdf, other]
Title: A Robust Hot Subdwarfs Identification Method Based on Deep Learning
Subjects: Solar and Stellar Astrophysics (astro-ph.SR); Astrophysics of Galaxies (astro-ph.GA); Instrumentation and Methods for Astrophysics (astro-ph.IM)

Hot subdwarf star is a particular type of star that is crucial for studying binary evolution and atmospheric diffusion processes. In recent years, identifying Hot subdwarfs by machine learning methods has become a hot topic, but there are still limitations in automation and accuracy. In this paper, we proposed a robust identification method based on the convolutional neural network (CNN). We first constructed the dataset using the spectral data of LAMOS DR7-V1. We then constructed a hybrid recognition model including an 8-class classification model and a binary classification model. The model achieved an accuracy of 96.17% on the testing set. To further validate the accuracy of the model, we selected 835 Hot subdwarfs that were not involved in the training process from the identified LAMOST catalog (2428, including repeated observations) as the validation set. An accuracy of 96.05% was achieved. On this basis, we used the model to filter and classify all 10,640,255 spectra of LAMOST DR7-V1, and obtained a catalog of 2393 Hot subdwarf candidates, of which 2067 have been confirmed. We found 25 new Hot subdwarfs among the remaining candidates by manual validation. The overall accuracy of the model is 87.42%. Overall, the model presented in this study can effectively identify specific spectra with robust results and high accuracy, and can be further applied to the classification of large-scale spectra and the search of specific targets.

[4]  arXiv:2201.09266 (cross-list from physics.chem-ph) [pdf, other]
Title: Rotational spectroscopy of isotopic oxirane, $c$-C$_2$H$_4$O
Comments: 10 pages, including tables and figure; J. Mol. Spectrosc., accepted
Subjects: Chemical Physics (physics.chem-ph); Astrophysics of Galaxies (astro-ph.GA); Instrumentation and Methods for Astrophysics (astro-ph.IM)

We studied the rotational spectrum of oxirane in a sample of natural isotopic composition in selected regions between 158 GHz and 1093 GHz. Investigations of the isotopologs with one $^{13}$C or one $^{18}$O were the primary focus in order to facilitate searches for them in space. We also examined the main isotopic species mainly to look into the performance of Watson's A and S reductions both in an oblate and in a prolate representation. Even though oxirane is a rather asymmetric oblate rotor, the A reduction in the III$^l$ representation did not yield a satisfactory fit, as was observed frequently earlier for other molecules. The other three combinations yielded satisfactory fits of similar quality among each other; the A reduction in the I$^r$ representation required two parameters less than both S reduction fits.

[5]  arXiv:2201.09438 (cross-list from astro-ph.SR) [pdf, other]
Title: A spatially dependent correction of Gaia EDR3 parallax zero-point offset based on 0.3 million LAMOST DR8 giant stars
Comments: 9 pages, 6 figures, 1 table, accepted for publication in AJ
Subjects: Solar and Stellar Astrophysics (astro-ph.SR); Astrophysics of Galaxies (astro-ph.GA); Instrumentation and Methods for Astrophysics (astro-ph.IM)

We have studied the zero-point offset of Gaia early Data Release 3 (EDR3) parallaxes based on a sample of 0.3 million giant stars built from the LAMOST data with distance accuracy better than 8.5\%. The official parallax zero-point corrections largely reduce the global offset in the Gaia EDR3 parallaxes: the global parallax offsets are $-$27.9 $\mu$as and $-$26.5 $\mu$as (before correction) and $+$2.6 $\mu$as and $+$2.9 $\mu$as (after correction) for the five- and six-parameter solutions, respectively. The bias of the raw parallax measurements is significantly dependent on the $G$ magnitudes, spectral colors, and positions of stars. The official parallax zero-point corrections could reduce parallax bias patterns with $G$ magnitudes, while could not fully account the patterns in the spaces of the spectral colors and positions. In the current paper, a spatially dependent parallax zero-point correction model for Gaia EDR3 five-parameter solution in the LAMOST footprint is firstly provided with the advantage of huge number of stars in our sample.

[6]  arXiv:2201.09580 (cross-list from astro-ph.HE) [pdf, other]
Title: Common patterns in pulse profiles of High Mass X-ray Binaries
Authors: Jaime Alsono-Hernandez (1), Felix Fuerst (2), Peter Kretschmar (3), Isabel Caballero (4), Amy Joyce (5) ((1) Universidad Complutense de Madrid, (2) Quasar SR for ESA/ESAC, (3) ESA/ESAC, (4) Aurora Technology for ESA/ESAC, (5) Remeis-Observatory & ECAP)
Comments: 10 pages, 8 figures plus 38 figures in the appendix. Accepted for publication in A&A
Subjects: High Energy Astrophysical Phenomena (astro-ph.HE); Instrumentation and Methods for Astrophysics (astro-ph.IM)

The pulsations of X-ray pulsars carry information about the accretion and magnetic field geometry. Here we present a study and classification of energy resolved pulse profiles of a sample of X-ray pulsars, focusing on high-mass X-ray binaries. Our goal is to perform a classification of X-ray pulsars based on their observed pulse profiles and look for correlations between this classification and their principle physical observables. The analysis pipeline is available online. We analysed the pulse profiles of a sample of X-ray pulsars using data obtained with the XMM-Newton and NuSTAR. We fit the energy resolved pulse profiles with a Fourier series of up to five harmonics. We investigate relationships between the pulse profile properties and other observables of the systems (e.g., orbital period, magnetic field strength, and luminosity) to study the extreme physics of these systems. The sources were divided into three groups by a classification based on the shape, the dominance of the fitted Fourier harmonics and their respective evolution with energy. We do not find a conclusive correlation between the pulse profile shapes or groups and other parameters of the systems. However, a weak trend was found when comparing our classification to the sources' location in the spin period-orbital period diagram. Further studies are required to confirm this trend. Despite the large variety of pulse profiles of the X-ray pulsars, we found that with our approach clear categories emerge which we use to classify their behavior as function of energy. As we do not find a clear relationship between our classification scheme and other parameters we conclude that X-ray pulse profiles are influenced by other hidden variables.

[7]  arXiv:2201.09797 (cross-list from astro-ph.EP) [pdf, ps, other]
Title: ExoCAM: A 3D Climate Model for Exoplanet Atmospheres
Comments: Accepted to Planetary Science Journal. ExoCAM and ExoRT source code available at: this https URL and this https URL
Subjects: Earth and Planetary Astrophysics (astro-ph.EP); Instrumentation and Methods for Astrophysics (astro-ph.IM)

The TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI) project was initiated to compare 3D climate models that are commonly used for predicting theoretical climates of habitable zone extrasolar planets. One of the core models studied as part of THAI is ExoCAM, an independently curated exoplanet branch of the National Center for Atmospheric Research (NCAR) Community Earth System Model (CESM) version 1.2.1. ExoCAM has been used for studying atmospheres of terrestrial extrasolar planets around a variety of stars. To accompany the THAI project and provide a primary reference, here we describe ExoCAM and what makes it unique from standard configurations of CESM. Furthermore, we also conduct a series of intramodel sensitivity tests of relevant moist physical tuning parameters while using the THAI protocol as our starting point. A common criticism of 3D climate models used for exoplanet modeling is that cloud and convection routines often contain free parameters that are tuned to the modern Earth, and thus may be a source of uncertainty in evaluating exoplanet climates. Here, we explore sensitivities to numerous configuration and parameter selections, including a recently updated radiation scheme, a different cloud and convection physics package, different cloud and precipitation tuning parameters, and a different sea ice albedo. Improvements to our radiation scheme and the modification of cloud particle sizes have the largest effect on global mean temperatures, with variations up to ~10 K, highlighting the requirement for accurate radiative transfer and the importance of cloud microphysics for simulating exoplanetary climates. However for the vast majority of sensitivity tests, climate differences are small. For all cases studied, intramodel differences do not bias general conclusions regarding climate states and habitability.

[8]  arXiv:2201.09804 (cross-list from astro-ph.EP) [pdf, ps, other]
Title: Estimates of the change rate of solar mass and gravitational constant based on the dynamics of the Solar System
Subjects: Earth and Planetary Astrophysics (astro-ph.EP); Instrumentation and Methods for Astrophysics (astro-ph.IM); Solar and Stellar Astrophysics (astro-ph.SR); General Relativity and Quantum Cosmology (gr-qc)

The estimate of the change rate of the solar gravitational parameter $\mathrm{d}(GM_{\odot})/\mathrm{d}t$ is obtained from processing modern positional observations of planets and spacecraft. Observations were processed and parameters were determined basing on the numerical planetary ephemeris EPM2019. The obtained annual decrease in solar mass $M_{\odot}$ accounts for the loss through radiation ${\dot M}_{{\odot}\mathrm{rad}}$, through the outgoing solar wind ${\dot M}_{{\odot}{\mathrm{wind}}}$, and for the material falling on the Sun ${\dot M}_{{\odot}\mathrm{fall}}$. The estimated relative value is within $-13.4\cdot 10^{-14} < (\dot M_{\odot} /M_{\odot})_{\mathrm{rad}+\mathrm{wind}+ \mathrm{fall}} < -8.7\cdot 10^{-14}$ per year. The following range for the change rate of the gravitational constant $G$ was obtained: $-2.9 \cdot 10^{-14} < \dot G /G < + 4.6 \cdot 10^{-14}$ per year $(3\sigma$). The new result reduces the interval for the change in $G$ and narrows the limits of possible deviations for alternative gravitational theories from general relativity.

Replacements for Tue, 25 Jan 22

[9]  arXiv:2109.15319 (replaced) [pdf]
Title: A Large Diameter Millimeter-Wave Low-Pass Filter Made of Alumina with Laser Ablated Anti-Reflection Coating
Comments: This version reflects the published version; 21 pages, 11 figures
Journal-ref: Optics Express (2021), Volume 29, #25/6, Pg 41745
Subjects: Instrumentation and Methods for Astrophysics (astro-ph.IM)
[10]  arXiv:2102.02828 (replaced) [pdf, other]
Title: Scattering Networks on the Sphere for Scalable and Rotationally Equivariant Spherical CNNs
Comments: 18 pages, 6 figures, accepted by ICLR, code at this https URL
Subjects: Computer Vision and Pattern Recognition (cs.CV); Instrumentation and Methods for Astrophysics (astro-ph.IM); Machine Learning (cs.LG); Image and Video Processing (eess.IV)
[ total of 10 entries: 1-10 ]
[ showing up to 2000 entries per page: fewer | more ]

Disable MathJax (What is MathJax?)

Links to: arXiv, form interface, find, astro-ph, recent, 2201, contact, help  (Access key information)