Title: High pressure induced precipitation in Al7075 alloy

Abstract: Precipitate-matrix interactions govern the mechanical behavior of precipitate strengthened Al-based alloys. These alloys find a wide range of applications ranging from aerospace to automobile and naval industries due to their low cost and high strength to weight ratio. Structures made from Al-based alloys undergo complex loading conditions such as high strain rate impact, which involves high pressures. Here we use diamond anvil cells to study the behavior of Al-based Al7075 alloy under quasi-hydrostatic and non-hydrostatic pressure up to ~53 GPa. In situ X-ray diffraction (XRD) and pre- and post-compression transmission electron microscopy (TEM) imaging are used to analyze microstructural changes and estimate high pressure strength. We find a bulk modulus of 75.2 +- 1.9 GPa using quasi-hydrostatic pressure XRD measurements. XRD showed that non-hydrostatic pressure leads to a significant increase in defect density and peak broadening with pressure cycling. XRD mapping under non-hydrostatic pressure revealed that the region with the highest local pressure had the greatest increase in defect nucleation, whereas the region with the largest local pressure gradient underwent texturing and had larger grains. TEM analysis showed that pressure cycling led to the nucleation and growth of many precipitates. The significant increase in defect and precipitate density leads to an increase in strength for Al7075 alloy at high pressures.