Title: Nonlinear electrical conductivity in a 1D granular medium

Abstract: We report the observation of the electrical transport within a chain of metallic beads (probably slightly oxidized) under applied stress. We observe a transition from an isolating to a conductive state as the applied current is increased. The voltage-current U-I characteristics is found to be symmetric with an ohmic reversible component continuously followed by a nonlinear hysteretic part saturating to a critical voltage of 0.4 V per contact. This 1D experiment allows to understand the phenomena linked to this conduction transition such as the "Branly effect'' by focusing on the nature of the contacts instead of the structure of the granular network as usual. We show that this transition comes from an electro-thermal coupling due to the local heating of the microcontact up to their melting near 1000 degre C (even for so low voltage as 0.4 V). Based on this self-regulated temperature mechanism, an analytical expression for the nonlinear U-I back trajectory is derived in very good agreement with the data. It also allows the determination of the microcontact temperature with no adjustable parameter. Moreover, the relevant interface between two beads is the oxide/oxide one and not the metal/oxide one. Finally, the stress dependence of the resistance is found strongly non-hertzian underlying a contribution due to this contaminent film which usualy cannot be discriminated from the contact network contribution in 2D or 3D experiments.